A reader found a clear one-image explanation of tape measure specs.
Benchtop CNC Router Basics
Here’s a primer on CNC router basics.
Revisiting What an Amp-Hour Means for Cordless Power Tool Batteries
So, you want to know more about cordless power tool battery packs?
Power Tool Tech: Brushless Motors 101
You’ve heard a lot about brushless power tools on ToolGuyd and elsewhere. Here’s a brief discussion about brushless motors and the advantages they bring to cordless power tools.
Angled Finish Nailers: DA vs. FN Styles
There are DA and FN angled finish nailers. What’s the difference?
Tool Intro: Pinch-off Pliers
Do you work with fluids and flexible tubing or hosing? Consider using pinch-off pliers the next time you need to cut off flow along a length of tubing.
What are 7/16″ Hex Impact Wrenches Used For?
What are 7/16″ hex impact wrenches used for? The short answer: BIG bits.
What is a Lumen, What is Lux, and More LED Flashlight Technical Mumbo Jumbo
Have you ever wondered what a lumen was? We covered that and more.
Thermal Image of a Cordless Drill
Here’s a thermal image of a compact cordless drill, along with an explanation of why the motor heats up and what happens if you push it too far.
Hammer Drill Driver vs. Impact Driver, What’s the Difference?
If you’ve ever wondered about how an impact driver differs from a hammer drill, here’s a brief explanation.
5 Reasons to Buy a T-Handle Screwdriver Bit Holder
Do you have a T-handle bit holder in your tool box? If not, here are a couple of good reasons why you should buy one.
8 Garage Essentials – How to Deck Out or Upgrade Your Garage
Do you agree with what we feel are the top 8 garage essentials?
Hammer Drills Demystified, and Why You Might Need One
My article on hammer drills just went live on Popular Mechanics’ website. Titled Who Needs a Hammer Drill, the article discusses the benefits of a hammer drill, the differences between various tool styles, and talks a little about the appropriate drill bits. If you’re at all curious about hammer drills, check it out! Who Needs a Hammer […]
Anti Cam Out Screwdriver Tips – “ACO” & “ACR”
Here we take a closer look (literally) at ACR (anti-cam-out) screwdriver tips.
Holey Sheet Metal!
Need to brush up on your sheet metal hole-making skills ? Check out my how-to over at Popular Mechanics!
How to Use a Ridgid Flaring Tool
How do you use a Ridgid tube flaring tool? Check out Steve’s detailed HowTo over at the ShopNGarage Forum to find out! Update: The Shop N Garage forum is defunct, so the broken links have been removed. Sorry about that, this was done without warning and is out of our control.
How to Use Split Ring Pliers
Opening lots of key rings? Split ring pliers will save your fingernails.
How to Use a Rotary Tubing or Pipe Cutter
After yesterday’s quick review of a Superior Tools pipe cutter, we received a few inquiries about how to properly use such a cutter. Most if not all rotary tubing and pipe cutters share a similar design. Like a C-clamp, there is always one stationary support, and one adjustable support that is mounted to the end of […]
Intro to Dead Blow Hammers
A dead blow hammer is a type of mallet designed to deliver strong blows with minimal rebound. The head of a dead blow mallet is hollow and filled with sand or shot. Because of this, the force delivered by each strike is spread over a greater amount of time, thus reducing rebound while minimizing damage […]