I’ve dropped the pace on social media recently, so instead of a “what I posted about this week” summary, this is more of a “posts from recent months” type of roundup.
If you’d like to follow along with new posts, here are links to our channels:
Instagram: ToolGuyd
Facebook: ToolGuyd
Twitter: ToolGuyd
Advertisement
I recently posted here that I was jumping into the world of rechargeable LED flashlights. This is what that looks like, or at least part of what that looks like. I’m going to explore a whole lot of different brands, configurations, and styles. If you have any specific requests, now’s the time.
Advertisement
You can check out the full Kobalt 24V XTR cordless power tool launch post here.
aerodawg
I pump my lawn/garden tires full of the Slime Prevent and Repair that can be left in long term. Prevents just about anything except a once yearly air top off until the tires literally rot away.
fred
I don’t know if you replaced your Fiskars hand pruning shears (secateurs as my wife would say) – but she only uses Felco or ARS brand ones. She’s left handed – so mostly uses these:
https://www.amazon.com/Felco-Classic-Pruner-Left-Handers/dp/B0001IOYXK/
BTW, I’m told that bypass secateurs are the only style to use for live plants – while anvil-style pruners (do more damage to live plants) – should only be used for dead wood.
Stuart
I dug out an older manual-style pruner that’s been doing okay since – Facom maybe? I have also been using Corona precision shears for trimming of my veggie plants, and might stick with that brand for something bigger. Might try Felco too, I’m trying to put much more conscious effort into keeping things neat and tidy moving forward.
fred
When my wife put me to work the last time – she handed me these:
https://www.amazon.com/ARS-HP-VS8XR-Rotating-Handle-Pruner/dp/B0778H5CZZ
but it looks like they may not be made any longer
She also uses manual hedge shears (KRS1000) from ARS when she can – telling me that those powered hedge trimmers that I (and our landscaper) use are not good for the health of the shrubbery.
Big Richard
Kinda looks like you have the DW3194 40t circ saw blade on that miter saw. Not a huge deal, but that 18 deg hook angle can lift your work pieces up on a sliding miter saw. Try the DW7114PT 40t blade, its 7 deg hook angle is better (and safer) for sliding miters.
Big Richard
*DWA171440 not DW3194 (old p/n)
Stuart
Thanks – will consider it! I’m usually much more conscious about blade selection, especially when sliders are involved.
I needed to switch out from my aluminum/plastic blade fast, and that was the first blade I found easily. I was cutting 1×2 cedar, with the slider locked in place. The alum/plastic blade was back on within a few minutes.
I need to double-check, but believe it’s the DWA171440, which you’re right about being meant for circular saw use.
Nathan
when my gorilia cart tire died I bought a no flat 30 is dollar version from Tractor supply. Yes spendy for one wheel and tire but should last more than 2 years too.
My other thought though was to make a new tire out of ply wood and staple the old tire to it. IE circle jig – 3/4 rough ply, 4 pieces – so say 2.5 inches thick cut to 13 inch diameter – old tire with hole in it placed over end – stapled to the ply stack. ply stack held together with alternating side dry wall screws.
Might try it when the next one dies. but cart tires are amazingly expensive.
Bill
My neighbor had some yard cart tires that were constantly leaking down, so he decided to try filling them with Great Stuff foam sealant from HD. He says it has worked well for him and no more leaking tires.
Timmy
I had some Gorilla Cart tires that went flat after a year. I ended up getting the no-flat tires from GC. Expensive, but worth it. I have lots of thorns in my yard and I knew that flats would be a constant issue.
lauren
Returned those same Fiskars pruners to Ross yesterday as I figured they couldn’t reasonably cut 3/4 as claimed. I’ll stick with the oversized corona pruners when I need it.
Koko The Talking Ape
So what ARE your favorite gloves?
Stuart
My old Mechanix gloves that I can’t replace anymore. I am also quite fond of Milwaukee gloves, but that’s more out of convenience.
The best work gloves are those that I have around. =)
PETE
Ahhhh the OLD mechanix gloves from like 8 years ago were the best. They lasted Soooo long. I think i have a old worn out pair in the back somewhere in my glove pile. Have you tried the Abrasion Resistant Mechanix gloves? Those are my favorite these days.
Stuart
Thanks, I’ll give them a try, or maybe the 4X version for $2 more. It looks the the M-Pact has changed again, I’ll give those another go as well.
Stacey Jones
I just ordered this nail remover: https://www.amazon.com/dp/B01H5RNHPA/ . Any idea how big/powerful air compressor I need? I’m planning on using it during pallet disassembly. I figured it was a “no regrets” way to learn woodworking.
Stuart
Sorry, I tried to find this info, but nothing came up.
Big Richard
1. Great little tool, a lot of fun.
2. The air flow requirements are minimal, similar to a brad or finish nailer. If a tool does not list its SCFM requirement, it is usually because it is so low it doesn’t matter (<1 SCFM).
3. The pressure is recommended 80-120 PSI, though 60 PSI is good for popping nails out of thin pallet slats and not having the nails fly out of the wood and directly into your foot.
4. I use mine with my cordless FlexVolt 2.5 gallon compressor, which is rated at 1.2 SCFM @ 90 PSI, and it is more than enough juice. I don't think there is a single compressor on the market that is "too small" for the AP700. A 1 gallon hot dog compressor would work.
Daniel
Wow, i just now noticed the hammer in your logo is backwards. Has it always been that way or is it some kind of “sign of the times” for 2020.