New Bosch Tools & Accessories WoC 2012

Over at the World of Concrete 2012 event, Bosch announced quite a few new tools and accessories.

Bosch GLM50 Laser Distance Measuring Tool

Bosch recently added the GLM50 to their laser distance measuring tool lineup. The new addition features accuracy up to 1/16″ 165-foot range, slim design, large 3-line backlit display, round buttons with silicone overlay, large soft grip areas, IP54 rating and 3-ft impact protection rating. It small size, reasonable accuracy and medium range make it suitable for interior length, area, volume and surface measurements. ETA is Feb 2012.

Bosch Daredevil Saw Blades

Bosch’s Daredevil framing blades feature thin-kerf extra-hard steel plate blades with triple-sharp micrograin carbide teeth and a friction-reducing finish. These blades are currently available in common 6-1/2″, 7-1/4″ and 8-1/4″ sizes, and there are plans to introduce 10-inch and 12-inch blades at around May 1st.

Bosch SDS-Max Rotary Hammer RH850VC

The new rotary hammer is said to be best in class in terms of amps, impact energy and drilling speed. It’s also said to offer the best vibration dampening in its class. The RH850VC features a 14A motor, 1100-2750 BPM impactor, 12.7 ft-lb impact rating and 18.7 lb weight. MSRP is $800 and ETA is August 2012.

BullDog Xtreme Max Rotary Hammer RH228VC

The RH228VC is said to be best in class in all meaningful measures. It features more power (2.4 ft-lbs) and less vibration (12 m/s^2) than most others in its class. It can drill holes up to 1-1/8″ in diameter, and has an 8A motor that delivers 0-5460 BPM. A longer piston and impact bolt allow the tool to strike harder and faster with fewer BPM, meaning quicker work with less wear on the motor.

Bulldog Xtreme Rotary Hammer Bits

Bulldog Xtreme bits feature a full-head carbide design for greater durability and cutting performance. New Bulldog SDS-plus bits are designed for next-generation hammers and feature optimized flutes that cut with lower friction and enhance dust removal.

Airsweep Wet/Dry Vacuum Updated with HEPA Filter Option

Bosch is upgrading its 13-gallon wet/dry vacuum cleaner with new filter and containment options. The new 3931A-PB Airsweep features a plastic bag that augments the tank-only receptacle system found in the original 3931A. The 10-gallon bags are tear resistant, hold twice the amount of concrete as paper bags and help to reduce clogging. New VAC019 HEPA filter cartridges allow the 3931A-PB Airsweep to exceed EPA lead remodeling, repair and painting regulations.

Inline Demo Hammer DH1020VC

A new inline demo hammer was also released, replacing the 11316EVS. It’s said to have the best power to weight ratio and vibration dampening in its class. It features a 15A motor, 900-1700 BPM impactor, 3.7/20.7 ft-lb impact rating and 24lb weight. MSRP is $900 and ETA is also August 2012.

Grinder Dust Collection Attachments USG-5, USG-7

These new polycarbonate universal grinder attachments fit all of Bosch’s 5-inch and 7-inch grinders, respectively, as well as many competitors’ grinders.

Wallscanner D-Tect 150 Floor and Wall Radar Scanner

The D-Tect 150 is an ultra-wide-band radar scanner designed to determine the material type, depth and relative width information of metal and non-metal objects such as wooden studs, plastic pipes and live AC wires.

GRL400H Self-Leveling Rotary Laser

The GRL400H is a self-leveling rotary laser designed for exterior applications. Accuracy is up to ±3/32-inch at 100-feet, and maximum range is 1300-feet. Battery life is 50-hours, and the fully-enclosed top housing is rated at IP56.

Included in the basic kit is a LR1 receiver with bracket, 2D batteries and a carrying case. Included in the GRL400HCK complete kit is a LR1 receive, aluminum tripod and 8-foot grade rod.

HDC Hammer Dust Collection

The new HDC dust collection system is designed to reduce the airborne dust created on the jobsite by chiseling, drilling and demolition applications. There will be 3 attachments – HDC-C1, a chiseling-only shroud; HDC-D1, for drilling and chiseling; and HDC-D2 for demo-use-only.

All attachments feature tool-free clamping, a quick adjustment mechanism, and vacuum dust port. The C1 and D1 fit Bosch’s SDS Max Spline hammers, and the D2 fits Bosch;s 1-1/8 hex breaker hammers. Included adapters ensures compatibility with a variety of other brands’ hammers. The C1 and D1 versions are priced at $99 and $129, and the C2 $169.