ToolGuyd

Tool Reviews, New Tool Previews, Best Tool Guides, Tool Deals, and More!

ToolGuyd > Power Tools > Oscillating Tools > ToolGuyd Cleanup Giveaway #4: Dewalt Oscillating Multi-Tools + Extras

ToolGuyd Cleanup Giveaway #4: Dewalt Oscillating Multi-Tools + Extras

If you buy something through our links, ToolGuyd might earn an affiliate commission.

Dewalt Oscillating Multi-Tool Giveaway Prize Bundle

One lucky winner will get new Dewalt corded and cordless oscillating multi-tools! I gave away my test units a while back, and am not sure where these duplicates came from. They look like they’ve never been used!

I should update my “best cordless oscillating multi-tool” guide, as it came out 4 years ago. But, based on my past and current experiences, this 20V Max brushless oscillating multi-tool is still one of the best. It’s ergonomic and a decent performer.

Advertisement

The only downside is that the tool-free blade change mechanism changes to a hex-bolt design if you want to use non-slotted oscillating tool blades or accessories. But, on the bright side, at least it’s a universal design. Dewalt could have limited it to their own blades, and similar slotted one, but they didn’t.

Sorry, you only get one accessory box. They’re bulky and the second one won’t fit in the shipping box. But, I did cram the other accessories in there, except for the sanding pads, which the winner will still get.

Accessories are readily available via Amazon, and it actually looks like Dewalt has been expanding the lineup with new styles. It’s a good time to own these tools.

The winner will also get a small Dewalt level, EZ Lock pliers that I bought (from Harry Epstein Co?) but never reviewed because I don’t like them much, and 2 Craftsman mini pliers.

Notes:

Some of the tools have been in deep storage. The rubbery grip material has bloomed and needs a good cleaning.

Advertisement

Batteries and charger are NOT included.

By entering the giveaway, you acknowledge that the tools will be provided as-is, and with any risks or safe-use responsibilities falling to the winner.

Since most tools are designed to be bumped around inside a tool bag, packaging will be a little sparse, so as to pack as much as possible into shipping boxes.

Giveaway Rules

Dewalt Oscillating Multi-Tool Giveaway Prize Bundle

The Prize: Everything you see here.

How to Enter: Leave a comment and tell me why you would want to win this Dewalt oscillating multi-tool prize bundle.

One entry per person.

Why? These tools are begging to be taken off the shelf and put in new hands!

Winner Selection: 1 winner will be selected at random.

Prize Fulfillment: The tools will ship out via USPS. If absolutely necessary, I can ship via UPS instead.

Rules: Entry period ends at 11:59pm ET 1/11/2018.

Contiguous USA addresses only.

Fill this out:

Address Form

If you already filled out the address form when entering another ToolGuyd “Cleanup Giveaway,” there’s no need to do it again.

The address and shipping information entered into the form will only be used for the purpose of this and other “ToolGuyd Cleanup” giveaways.

Questions should be added within your single entry comment, or you can ask them here: Gearing up for some giveaways.

Related posts:

No related posts.

446 Comments

  1. This would come in very handy as the current porter cable unit I have is not thrilling me. Not to mention unit gets very hot and hard to hold after a few minutes of use. Thanks for doing this and the other giveaways.

  2. Need a more capable oscillating tool to help with some flooring projects coming up.

  3. This would be a great gift for my brother!

  4. Need to get up some flooring in the basement of the house I just moved into. These would be terrific

  5. The corded multi tool would be a nice addition, currently I have a harbor freight that I’m surprised hasn’t broken yet.

  6. I’m in need of a oscillating tool too, this would be great.

  7. I need a multi-tool for some trim projects in the works!

    thanks

  8. I’m a Milwaukee guy, but my dad is a Dewalt guy and he needs a new multi-tool! If I win, this will be for him. Thanks!

  9. I am surrounded by DeWalt 20v tools and have the corded Porter Cable OMT that uses the same blade system (and a lot of the pricey carbide blades). I would love to add a cordless option for some cuts around the property and would be happy to have a second corded one too. Thanks for the awesome giveaways!

  10. Dewalt ergonomics are top notch, I keep being amazed how versatile oscillating tools are.

  11. I have been wanting to get one of the Dewalt oscillating multi-tools but have not found an excuse to purchase one yet. This would solve my problem!

  12. I’ve used a borrowed oscillating tool once and was really happy with how it worked, it would be nice to have my own.

  13. This could come in handy for some repairs I am making. Right now I borrow one from a friend.

  14. An oscillating tool would round out my set of power tools very nicely. Sometimes there just isn’t anything better to use.

  15. These would be awesome. I’ve been running into more and more situations where one of these would come in handy and I haven’t quite got myself to pull the trigger on buying one.

  16. I need to upgrade to a cordless oscillating tool. And one with a univeral blade attachment. Thanks!

  17. I’m currently making some built in shelves for wife’s birthday, this would make trim work much smoother!

  18. Would be nice to have a multi tool for some of my stranger home fixes.

  19. Thanks so much for the shot, I’d like a cordless multi-tool for the car, quick fixes when my supers are not around the properties I manage. I would want another nice multi-tool tool at the ready with a little plunge blade.

    Thanks for the chance

  20. I have the cordless version in this kit, and have been amazed at how often it comes in handy. This one would go to my dad, and the corded would be the go-to for larger projects. Already mentioned it, but this series of giveaways is very impressive!

  21. My Harbor Freight corded multi-tool’s has a flaky variable speed dial. The unit will power-off if I hold it at certain angles.

  22. I want to win to improve my tight space sanding game!! And a plug in Oscillator, the tool I want…..

  23. I’m about to make a move into a new home, and having these OMTs would be a huge help as I am sure the house will have all sorts of projects needing my attention.

  24. I have a corded Rockwell but have been wanting to get a cordless tool.

  25. I need these to replace the crappy off-brand one I struggle with!

  26. My sister just bought a house and there are a lot of small trimming jobs to do!

  27. I don’t own an oscillating tool yet, as I’m currently in the process of compiling a good tool kit for home/DIY use. This would fit the bill perfectly!

  28. Sweet Giveaway
    would give the 20v max oscillation tool to my dad as we kitted him out on some dewalt 20v items for xmas and i would use the corded one !

  29. never met a Dewalt tool I didn’t like

  30. I would love to win this and try the Dewalt tools. It would also give me a reason to buy into the Dewalt cordless tool line. I currently have Makita and Ryobi cordless tools.

  31. Corded AND cordless?! Very nice. I know someone who already has a couple batteries that could use the cordless version, and replacing my $20 Harbor Freight version that gets hot enough to the touch that I’ve dropped it would be wonderful. Not to mention that sweet sweet quick release…

  32. i am part of the 20V dewalt line-up and the cordless oscilating multi-tool would be very helpful. I am just starting work to finish my 1,500 sq ft basement and i can think of many instances when this would be useful.

  33. This one would be the hardest for me to personally give to friends that are new homeowners and are doing remodeling. But they are just building their toolboxes so it would make sense for them to get this. Plus I already have the Bosch 12v OMT…but it would still be awesome to win!

  34. Really would like the oscillating tool. Have been eyeing the 20v tool for awhile. Like this for notching drywall for outlets

  35. I just got the 20v Max for all those attachments would be really nice to have. Bonus I now have to really nice gift sets to give to someone.

  36. I would give my brother the cordless and I would keep the corded as he’s on the system already and we both end up borrowing my dad’s terrible oscillating tool or using my 12v Craftsmen one (with about 3 minutes of battery) constantly. These look great.

  37. this would be a great addition to the dewalt tool shelf.

  38. Love these units and looking for a second for my kid!

  39. I would just like an oscillating tool. I don’t own and believe I would put it to immediate work

  40. I’ve recently gone all-in on Dewalt cordless and the oscillating tool is on my short list, if not next. I’m sure my parents would love the corded one, unless it is significantly more powerful and I can justify keeping both…

  41. It would be nice for cutting door jambs.

  42. My M12 oscillating tool died recently, and aside from needing to replace it, I could really use the power of a corded unit.

  43. I would love this set because I have a need for additional multitools to keep at work and the river house. Thanks for doing the giveaways!

  44. I already have a nice Fein oscillating tool, but my Dad was rather envious when he last used it — would love to be able to gift him his own oscillating tool!

  45. This would be a great asset when it comes to cutting in electrical boxes into whatever they need mounted into.

  46. These would save me a ton of time helping put in new flooring and I just don’t have it in the budget to but my own right now

  47. Really need a cordless oscillating tool to notch some trim a as I have used the DEWALT one and loved it and I have plenty of 20 v battery’s. The level would be a great addition to my tool box as my small torpedo is a bit beat up , thank you

  48. I have the Bosch corded OIS tool, I bought on a great deal (thanks Stuart for posting it), just after Bosch came out with the new starlock system. I love it, have used it on conversion from carpet to hardwood floors, got the bonus room and stairs left to do! If I win this one, I would give as a gift to a friend.

  49. I’ve never had an oscillating multi-tool before, but I’d love to try one out for sanding in tight spots and cutting through thick rubber.

  50. Ive been looking to get the cordless but didnt take advantage of buying when it was on sale during holidays. Would love to add to my dewalt set

  51. My brother-in-law is a DeWalt guy. I’d give them to him…at least the cordless one! 😉

  52. I’ve beat the life out of my current Bosch oscillating tool. Time for an upgrade!

  53. A great tool for getting into small spaces, when nothing else will work.

  54. I’ve had my eye on the DeWalt cordless oscillating tool for a while – I’d love to win it here! DeWalt is my goto brand for 20V and this would be an awesome addition.

  55. I would like to finally own a multi tool.

  56. Would like to compare this to my Rockwell, but if I got these, I’d probably gift them to my friends since they could probably use them.

  58. Just bought a new house!! I need a multitool to cut some baseboards! Cheers!

  59. I have wanted one of the oscillating multi-tools, but have not purchased one. I am moving into a new home and this would be great for some renovation projects.

  60. My other oscillator died :(. It was a Harbor Freight special and served me well. Most my other tools are dealt and it would be a good addition to the family! The oscillator has saved my bacon a number of times.

  62. Oh my goodness!
    I want these items because I love black & yellow color combo!

  63. I’m slowly building my garage/shop. Definitely could put these to use.

  64. Oscillating multi tools are so useful throughout the house. I recently gave away the model I had (harbor freight) to a friend. I would love the opportunity to get one of the most useful tools from one of the best brands around.

  65. I’ll always take a black and yellow power tool, they never let me down! And I love my existing OMT. 🙂

  66. Those look brand new! Would help out alot, replacing the hardwood in my house next month.

  67. An oscillating multi-tool has been on my to buy list for a while, but has been getting pushed back due to other tools or events moving up in the pipeline . I’d love to get this get these into the garage and put them to good use!

  68. I’m in, thank you very much! I could use tools in my office since I work on projects during my lunch break.

  69. I have been considering picking up an oscillating multitool for a while now, seem useful for so many things. This would be a fantastic addition to the toolbox

  70. Been looking to add to my tool bag with the dewalt oscillating tool for awhile now.

  71. I don’t have any oscillating tools so this would be awesome

  72. This is on the top of my tool wish list and I’ve borrowed my neighbor’s way too many times to ask again.

    Thank you for the opportunity.

  73. I don’t have an oscillating tool in my toolbox so this would great. I can use these all the time!

  74. I want to win as I recently bought into the Dewalt 20v battery system but only have a few tools so far. Also, I only have a crappy Harbor Freight oscillating tool that I would love to toss in the rubbish bin.

  75. This would round out my Dewalt collection of power tools.

  76. I could definitely use a 2nd tool for home DIY projects

  78. Im doing a lot of small fix-it projects that these would be great for

  79. My rockwell OMT is probably one of my favorite tools, and I would love to upgrade to this kit.

  80. Love Dewalt tools and need an oscillating tool. Need it to trim out new baseboard in my house.

  81. I’ve never had an oscillating multi-tool before, but will be able to use one on lot of small projects that I am taking on!

  82. WI already have Dewalt tools and batteries and have been going back and forth on the oscillating tool (get it). This would be great.

  83. A better multi tool wood be helpful. Pun intended.

  84. Have a buddy that’s always borrowing mine, would let him have one… great tool.

  85. I still don’t have Oscillating tools and the dewalts are great

  87. I’ve not actually had a good enough excuse to use one of these oscillating tools….yet…. 8)

  88. My entire first floor is tile and I can foresee needing to make some “tweaks” in the summer…

  89. I plan on wiring a couple of my barns this summer and these would be good for cutting outlet holes

  90. My oscillating tool is on its last leg and in need of replacement sounds like this dewalt one will treat me better.

  91. I cant live without my multimaster – this bundle would be a great backup

  92. Would love to have some oscilating tools!

  93. I’m remodelling the kitchen and they would be perfect for drywall cutouts.

  94. The versatility of these tools means I could frequently find ways to improve my work on all kinds of projects. Finishing the basement comes to mind!

  96. I don’t have an oscillating tool, yet, and have been weighing the pros and cons of various brands, with a lot of help from Tool Guyd. Winning this would solve my problem.

  97. I would like to try one of these type of told out

  98. Oh man. This is the one for me!

    I wanted the $379 holiday bundle from Home Depot this year, but it just wasn’t in the budget. I still managed to swing an upgraded 20v Drill and driver, but I’m sorely lacking that osculating tool.

  99. This would make a great replacement for my dying porter cable. This seems to be one of my top used tools.

  100. Actually I’ve never tried this type of tools, as I am an electronics engineer… but nonetheless now it is always a good time to start a new hobby as any.

  101. Great to be able to gift these to my local building and trades program. Many students that could use tools through their education

  102. I really need an Oscillating tool . This would be awesome. i’ve never yet gotten to the job I can’t do without one so I haven’t got one yet. Man it would be nice.

  103. I think these could be really useful when I finally start finishing my basement, and when I start to replace the ugly MDF trim I foolishly had installed when my house was built.

    They would also remove at least one of the excuses I have for not starting those projects, too…hmm…perhaps these should go to a better home…

  104. I’ve been wanting an oscillating tool for a while now, these would be perfect!

  105. This would totally help me remove the old grout in my shower. Thank you, Stuart!

  106. I’ve never tried an oscillating multitool. It’d be interesting to try.

  107. This is a sweet tool set. I need that for my small shop.

  108. We are working on our house. These would be great for drywall cutting, hardwood floor corner scraping and door jamb work.

  109. These look awesome. Been meaning to get one I just couldn’t decide on brand.

  110. Okay, so these would be justification to switch battery platforms. Would love to win, even recognizing that it would get expensive!

  111. I’m currently only invested in Bosch’s 18v and this would incentivize me to get into DeWalt’s!

  112. Would love to try an ocillating saw. Recently remodeled my parents kitchen and I was sorely tempted to buy one. Ended up doing it the hard way with a Japanese flush cut saw. Wondering how this would work on prefinished hardwood flooring and for cutting subflooring out from under kick plates.

  113. I can always use a great tool like these. They would be great.

  114. I’ve been meaning to try the dewalt oscillating tool. This would be great.

  115. Grad student trying to make some money as a handy man! Love the multi tool!!!!

  116. I will use these to oscillate other things apart.

  117. Don’t have an oscillating multi-tool, corded or cordless, so this would be a great addition to the tool box.

  118. Could use a a new oscillator, the old corded PC version I have requires adapter.

  119. Could use these for my bathroom remodel. Need to cut doorjamb, install new vanity, and other enjoyable/unforeseen experiences to come.

  120. These would come in handy as I do some remodeling in my house – and I just started to get into the DeWalt ecosystem, so more tools would be wonderful!

  121. I’ve got one of those incredibly crappy Harbor Freight oscillating tools. The thing just about shakes my hands apart every time I use it, which is infrequently because it’s so irritating to use.

    I’d love a better designed alternative.

  122. I’ve got the Milwaukee oscillating tool and I’m not super impressed. This would give me a chance to try out the DeWalt one to see if its better.

  123. Been DeWalt follower for 60 years

  124. I have only used a m12 multi tool on site and this would really give me a chance to experience how much more efficient a m18 can be.

  126. To gift to extended family, as they Always borrow my tools.

  127. I’m going to be replacing flooring and trim throughout the house. The oscillating tools would come in very handy

  128. I currently have a number of Dewalt 20V tools and this would be an awesome addition!

  129. I’ve used the M12 oscillating tool and while nice, sometimes it’s underwhelming for the jobs I’ve tackled. Could really use the Dewalt version…

  130. I have been looking at a multi tool and these are great tools

  131. Yellow tools rock! I would love to add these to my collection.

  132. I’ve been eying one of these for a while now would be great to have

  133. Oscillating tool!!!!!! Need one for upcoming projects!

  134. My old oscillating multitool just died, and this would be a perfect replacement!

  135. I’ve got to cut some flush wooden vents into my floor in the next few months. These would help

  136. Oscillating tools are awesome! Been wanting to try one for a while now!

  137. Man, these look like a great set of Oscillating tools. Corded for bigger projects and a corded to hang on the garage wall for smaller tasks.

  138. I would finish adding more outlets in my shop! (Currently only have one useable)

  139. We use oscillating tools a lot at work and I have not purchased one yet so this would be awesome.

  140. The cordless oscillator would come in handy.

  142. Would love to increase my collection of oscillating tools.

  143. I’m a big fan of DeWalt and oscillating tools so this would be great.

  144. Wow, everybody loves Dewalt, right? Count me in.

  145. I’ve hovered over an oscillating drill display more than once, but never pulled the trigger. Please save me the indecision.

  146. who does not need more blades and sandpaper?

  147. Would like to give a good Dewalt tool like this a house to remodel.

  148. I use my buddy’s OMT probably more than I should 🙂 Winning this will make him happy.

  149. sander would be good for finishing the garage update

  150. I would keep the corded and give y best friend the cordless. I would use the corded tool for the flooring and trim work I need to do for the house projects I need to do.

  151. I use the Dewalt’s 20V max tool system but I don’t have their multi-tool, so it would be a nice addition to the tool lineup.

  152. I’ve never had an occilating tool. Dewalt makes good stuff, so I hope I win.

  153. I can definitely use one of these for my new house!

  154. I’m certain that I can find something useful to do with an oscillating tool if I get my hands on one.

  155. Those things are great for drywall work

  156. Would finally give me the motivation to finish the baseboard replacement project in my house.

  157. I’m dying for a cordless multi-tool. My corded harbor freight model is still going, but it sure would be nice to use something that was designed with ergonomics in mind! Not to mention cutting the cord for quick repairs at the rental and around the house and I could give that harbor freight model to my nephew.

  158. Hoping to replace a few stolen tools for brother-in-law and any extras would be kept for a future kid’s tool loaner program I would like to set up.

  159. Dewalt’s OMT is brushless … count me in.

  160. can’t go wrong with Dewalt

  161. Now I’m a pretty big Dewalt fan and and having longer run time (unlimited) is never a problem for tile removel

  162. These are the kind of tool that I haven’t needed too often but are awesome when they are needed. I would give the cordless one to my dad since he is in the Dewalt system anyway.

  163. I dream of cutting square holes out of plaster-and-lath without loosening the lath.

  164. Do not currently have a multi tool. These giveaways are very cool!

  165. I love this multitool. It’s noisier than the fein, but it has the easiest and fastest blade change on the market. Because I use a work trailer, I often duplicate tools for home use. Would love to have this for projects around the house.

  166. Just bought my first home and am doing a renovation, the multitool would be a great tool to have.

  167. Already on the DeWalt 20v platform, would like to give a multi-tool a try!

  169. I’d use these on some flooring projects I have to knock out

  171. Currently have a 12V OMT from other mfg., but my other cordless tools are DeWalt 20V and the 12V OMT isn’t cutting the mustard. It would be awesome to add the 20V yellow OMT to the stable and the accessories help, too!

  172. I’d use these to complement my existing dewalt 20v max tools. Also would be great for work.

  173. I have a tile project coming up and this would be perfect for molding so I can slide the tile underneath

  174. A multi-tool would be a good addition to my collection.

  175. It would be great to have another oscillating tool on the trailer, and this is the best one out there for cordless and corded for all we have put ours through. It would be great to have another one for another guy on the crew to have on him at all times to do everything with. We break out the fein corded from time to time, but we love the Dewalt version so much better!

  176. These would be perfect for my current project.

  177. This would be an amazing upgrade from my crappy harbor freight multitool, I have had that thing for a year and it’s about to fall apart.

  178. Would use the OMT for various tasks on volunteer projects to help my local community…the cordless OMT would compliment my o 20V set…mighty nice of ya to hook us up!

  179. I’d give one of these away and keep the other, then split the sanding pads between us. I’ve wanted an OMT for years now, and the DeWalt 20V one gets great reviews. They just sound so -useful- for random house projects.

  180. I have been eyeing up a multi tool for awhile, would really help at work and home.

  181. Every time I need to use an oscillating tool (usually in a quick pinch) I end up borrowing my father-in-law’s harbor freight model, and then I tell myself I need to buy a decent one ASAP.

    This set will allow me to share one with him as a thank-you, and prepare me for the next odd job as well. Win-win!

  182. I have so many little projects around the house that I could use this on, just haven’t been able to pick one up yet.

  183. I’d share one with my sister, and the other one would be added to my growing aresenal of dewalt tools, that I use around the house for various projects.

  184. Because oscillating tools are super useful

  185. I live in an old house where electrical outlets are scarce and nonexistent outside. The cordless one would be very useful.

  186. Dewalt is one of my favorite brands! I have been looking at a for a oscillating tool

  187. I started out with craftsman oscillating tool it was ok upgraded to a dremmel but i have hade my eye on the dewalt since use 20v tools

  189. Would be great to add to the DeWalt collection

  190. Great gift for my friend remodeling a house to do undercutting of doors.

  191. I spend 2 days every week working as a volunteer facility maintenance trainer. These tools would get much use during these training sessions.

  192. Own oscillating multitool is getting worn out so this would be nice.

  193. Either multitool with tool free blade changes, say hello to convenience!

  194. The dewalt 20v system tools are what i currently run. I am missing the oscillating tool from my collection and have been waiting for the right price/sale for them to come up so i can pick one up. This giveaway opportunity would be perfect for me because i would put the tool to immediate use on my home. I have a few exterior upgrades/renovations that i have planned out.

    Thanks for hosting this toolguyd.com!

  195. These would definitely go to mom’s house. I have a few Dewalt tools there.
    Then I can bring back home my Fein multi-master and accessories.

    The pliers, there might be negotiation about them. 😉

  196. I have no need for the Bosch collection but I would love a better multi tool than the terrible m12 model, while the cordless one would go to my brother in law who bleeds yellow.

  197. Multi tools would be awesome for cutting in electrical boxes.

  198. The oscillating tool will be perfect for the foreclosed home I am renovating with a friend. I love all my DeWalt tools and the versatility of the 20v max system.

  199. I would want to win this because I have the original underpowered dremel multimax and needed more power for my projects.

  200. Would like to add this to my Dewalt collection.

  201. This is something I’ve been eyeing for some time. It would be useful for the upcoming flooring project I have on my house. I’ve already got over a dozen of the 20V’s but do not have the Oscillating tool.

    This site has been such a huge help over the years. Thank you!

  202. Would be great for a new project I’m about to start expanding our boiler room into part of the garage.

  203. I’d love to have one of these for the “odd” jobs around the farm, or for those hard to reach places. Seems there’s things that can only be done with an oscillating multi-tool (or it at least does the job of many niche tools in one device).

    Thanks for the giveaway!

  204. Great for floor repair work. Water damaged floors from frozen pipes are no good. A lot of that type of damage to deal with due to the recent coldsnap along the east coast.

  205. Would love to replace my cheapie masterforce oscillating tool. Also, looking to get some dewalt 20volt tools anyway, so this would be a good complement. Thanks, Stuart!

  206. I bleed black and yellow. I have 20v tools, so I have plenty of batteries. Thanks Stuart

  207. What didn’t you like about the EZ Lock pliers? They look like vise grip clones. Anything special about them? I wouldn’t mind trying them out.

    I actually have a Craftsman oscillating tool from 5 or so years ago that I like quite a bit: very useful tool, but I’d probably keep the DeWalt and pass on the Craftsman.

  208. About to tackle a pantry rebuild project, these tools would definitely be beneficial during this remodel.

  209. I love the oscillating tools. I would like to try out the dewalt versions!

  210. Interested in this bundle because I’ve always wanted to try dewalt. Now might be my chance.

  212. I had a cheapie multitool and ran it into the ground. Found that a battery one just does not last that long for scraping old paint and odd sanding jobs

  213. Need these! Don’t have any oscillating sanders and Dewalt stuff is good.

  214. Never had an oscillating tool and would like to try these out.

  215. Oh, I’ve got some projects coming up where I could really use one of these to make some clean holes in baseboards and drywall!

  216. I would build a gun rack for my step sons nerf guns.

  217. I don’t have an oscillating tool. This would be a nice addition!

  218. I’m fully set up with 20v (and FlexVolt) DeWalt tools. The 20v oscillating tool would make a very handy addition to my arsenal. Thank you!

  219. love these tools, my work truck was stolen in 2013 and a got the truck back minus all the tools, then got cancer so could not hardly work could hardly afford new tools bought a few harbor freight tools, but these dewalts are the best,
    don’t make much money anymore so cant buy quality tools anymore, plus the lung cancer gets me to out of breath so I cant much work done anymore, but I love your site and wish I had all the tools I gawk over, my utility body on my truck is big and the tool boxes are mostly empty so these dewalts would be great

  220. I almost bought these a couple of times but never could justify, these would make so many projects easier.

  221. I don’t have an oscillating tool. And I like yellow.

  222. Oscillating tools come in super handy in the marine repair industry and I’ve had one on my list of tools to buy for WAY too long!

  223. These dewalt oscillating multi-tools would be pretty handy for working on the house.

  224. I have dewalt tools from work, this multitool would be a great replacement from my first Ryobi that I still use when making furniture as my hobby.

  225. I keep a Dewalt set in my work truck and was actually looking to buy one to add to the toolbox. Hope to win !!

  226. More goodies for my offspring if I am lucky.

  227. Tools would be a big upgrade… but the locking pliers? Never seen anything quite like those before.

  228. I’ve used these before, insanely helpful!

  229. i would mostly want the plug in multi tool and i would give the battery one too my dad as he already has dewalt

  230. The multi tool would come in very handy as I have a flooring project that I’ve been putting off.

  231. I’d like to win this to give to a friend who could upgrade his current Harbor Freight multi-tool.

  232. I was looking at buying some of the ez lock pliers, excited at the chance to win some. I would keep the corded oscillating tool and try to find a home for the 20V max model as I don’t have DeWalt batteries.

  233. I’m already running 20v max tools so it would be a good addition to my lineup. We don’t have power outside of the house so it would keep me from having to running a cord out the kitchen window and getting into trouble ha.

  234. I have a 12v multitool, but have strongly been considering getting a 18 / 20v for notching stud walls.

  235. Never used tools like these before. Would love to try them out.

  236. planning to put down some flooring in a bedroom so this would surely come in handy

  237. I’d keep the battery one and donate the wired on to the theater department at a school I work for.

  238. I would like to see what the fuss is about oscillating multi-tools, I’ve never used one

  239. I could use an oscillating multi-tool for a lot of situations to make a nice clean cut over a sawzall.

  240. I had a fein tool at one point, but the switch failed/ was repaired numerous times until I just grew tired of the hassle. I’d be curious to try another brand…

  241. Some sweet pieces. Borrowed the 20v one from a nail bender the other day and it beats my wore out Dremel one!!

  242. I love Dewalt but i don’t have these yet. Thanks for the chance at winning these. Would be a great addition to my other tools.

  243. The corded oscillator. I burned up my HF one!

  244. Trying to get started on some projects. Would have no excuse if I had these.

  246. Oscillating tools are great and I could use a cordless one for tight access restricted spaces without a power source

  247. my oscillating tool doesn’t have quick change and I don’t have a cordless option – this would solve both of those issues.

  248. Would be a perfect addition to my holiday gift set

  249. I don’t have a multi-tool but have heard a multi-tool can make your life much easier.

  250. It would compliment my existing Dewalt lineup and inspire me to continue emailing you when i find good deals on tools in the future.

  251. I love oscillating tools! I was working on a family members house and I forgot my oscillating tool so I borrowed the neighbor’s Dewalt oscillating tool. It was way better than mine. However I can’t talk my wife into purchasing one when I already have.

  252. Perfect re-gift for my father-in-law and his current remodel.

  253. I am huge fan of the dewalt Oscalating tool and mine feel off of staging this fall and have not replaced it yet

  254. I’m hugely invested in Big Red tools. Bit I don’t have an oscillating cutter. This would be really handy for fixing floors and trim.

  255. Oscillating tool is the one gap in my tool box. I have gotten and return a multi Mac twice because reviews are always so varying. While I have gotten away with this toll till now. I know I am testing fate with how much longer I can go without one and will be stuck or end up with a less the desirable result.

  256. These would be handy for DIY repairs/projects around the house.

  257. I’d like to have these Dewalt tools so I can compare it to the Bosch oscillating tool I own. I could see the cordlesss one coming in handy. I’d give one of them to my grandpa since he just upgraded to Dewalt cordless tools.

  258. Would love these and a perfect combo to share!

  259. My buddy has these tools and says they’re the best

  260. Because a better oscillating multitool is always useful.

  261. My Dad is losing the ability to work safely with saws, so I’d love to give this to him so he can keep chipping away on projects around the house for my Mom!

  262. I’d love to add a corded oscillating tool to my mix. The extra blades and sanding pads would help the bottom line too. Thanks Stuart for your generosity!

  263. Who wouldn’t want these tools.

  264. Please pick me! I couldn’t purchase the one from Amazon the other day and will need these tools tip cut the trims off the doors as I am laying laminate flooring.
    Thank you!

  265. I would like to win these to use on my old house and to teach my son and daughters how to use tools as they work on school projects and their own inventions.

  267. I finally bought into the dewalt tools this year from my old Craftsman stuff and have been looking for a good deal on the oscillating tool. My current Dremel one is on it’s last leg.

  268. I’ve had my eye on that DeWalt 20v for a while. I’m tempted to work with that or the Milwaukee version but the DW is brushless.

    Airborne dust becoming a bigger deal everyday, I’d love to upgrade to a better oscillating tool to get more material removed while still being able to keep the dust down.

  269. Like Chance above, I’m a Milwaukee guy and my father uses Dewalt. I’d surprise him with these. I know he doesn’t have either of these models.

  270. As a cabinet punchlist guy I have to work in homes under construction that thd power is not on yet. My company gave me dewalt tools and so I already have the platform. I cannot afford a cordless multitool right now and need something better than the handsaws I have go use to cut back trim or framing to install components. Just today I had to install a dishwasher return and had to cut the base molding back to fit it against the wall. Quite a chore. I really need a cordless multitool. I own a couple of Fein multimasters but they dont help without power.

    Thanks for the informative site

  271. I actually just want the mini pliers. They look really nice.

  272. This prize would be a great to see how it could be used for wood carving. I might want to actually want to finish a carving that I start.

  273. I currently have a Bosch mutli tool that is fairly good but it’s a bit to much of a beast. The DeWalt cordless with its finger switch is the most comfortable unit to use. Having the ability to go from almost off to full speed using your finger is also a huge deal compared to dial controls everyone else uses. Multi tools are one of the most used items behind the drill/driver and I tend to “barrow” on of the guys DeWalt far to much.

  274. Have wanted to be an oscillating tool for years but could never justify the purchase. It would be awesome to win these so I could finally see what all the fuss is about.

  275. Actually if I’d win this I’d give it away to a friend who lost his and I’d probably keep the corded on for some trim work that needs to get finished around the house.

  276. Would be a great gift for a friend who only uses yellow tools!

  277. In on this mainly to re-gift to a co-worker who’s building his DeWalt cordless collection…

  278. One tool I thought I would never buy as an independent contractor….. the multi tool. Don’t know how I did various projects without it. Would love to compare the Dewalt to my rockwell sonicrafter that has been replaced twice in 2 years.

  279. The cordless one would round out my 20V Max collection and I’d love to pass the corded version on to my dad. Both would come in super handy on some upcoming projects.

  280. I have a Milwauke M12 multi-tool that works relatively well, but a short run time depending on battery used. A corded multi-tool would offer flexibility for tougher jobs.

  281. Love the oscillating tool concept. I have a been wanting to try it out. Thanks for doing this. Your site is the first i visit each day.

  282. I have a flooring job coming up and would love this for trimming my door molding.

  283. This would help out with the unfinished jobs I have around the house. Thanks

  284. I have an inexpensive multi-tool that is used quite a bit. It would be nice to move up to that DeWalt! Plus I could share my old one and possibly one of these with my sons! I cannot believe how useful oscillating tools are!

  285. My dad likes Dewalt so I would definitely give one of these to him. Not sure he has an oscillating multi-tool so this would be a nice gift.

  286. Because when they stole all my tools, they got my two fein corded oscillating tools, which I relied on frequently, I’ve not tried any dewalt tools in the last few years and am curious about what improvements they’ve made.

  287. Don’t currently own an oscillating tool so it’d be nice.

  289. This would be a great replacement for my aging Craftsman Nextec oscillating tool. I found my Nextec tool to be weak for some of the projects and the batteries run out quickly.

  290. I have had one of this on my list for a few years now and would love to finally have it in my collection of dewalt tools. I have 20volt and corded.

  291. This would be a great start into the Dewalt line for me!

  292. Would like to win this package of tools to check out the quality of Dewalt tools.

  293. OK, this one does have me excited, especially because, first, one of the oscillating tools is cordless and, two, I almost exclusively use DeWalt stuff and as a result I HAVE BATTERIES!!

    Corded oscillators are great for jobs requiring extended cutting, but I’ve used mine (a Bosch) in places where the cord was, well, I actually ran out of four-letter words once to describe the hassle (and that time when one of the extension cords came disconnected while I was in the attic I invented a few new ones….). Cordless, though, a spare battery – carefully placed wthin reach before you climb between the trusses – makes Mr. Frustration go away. So, yes, excitement at this one, almost 9-year-old, Dec 24th excitement. Just let me know and I’ll go stand next to the mailbox and wait for the package (which I can do now that the mail carrier’s restraining order has expired again).

    By the way, any word on that 175 PSI 80 gallon compressor giveaway? Not that I’m impatient or anything, but I am still wiping up leaking compressor oil….

  294. I’m a total DIY guy and an oscillating tool set has been on my wish list for a very long time. I have furniture and trim projects galore and will put these to use immediately! Always enjoy your post (I visit your site almost every day) and have enjoyed the benefits of the toolguyd promo code at KC Tools several times.

  295. could really use a cordless multi tool

  296. I don’t own a multi tool so this would be perfect.

  297. I would absolutely love to have this. I would invent reasons to use this. Do they make a cereal spoon attachment?

  298. I have mostly all dewalt tools except for those two, they look handy!

  299. this looks like an awesome assortment of tools that i would love to have.

  300. I am in dire need of a multi tool for my many projects

  301. It would be nice to add to my existing 20v lineup, especially since I was planning on getting the oscillating tool this weekend!

  302. I would like to try the DeWalt multi tools .

  303. I would like a better one than my Nextec. It’s ok, but I’m have a lot of panel cutting for outlets and grout work to do. It would be nice to get one that doesn’t rely on battery.

  304. This tool would definitely be useful from all the house projects i did this year without a tool like this

  305. I have a crappy cordless one I dont really care for and I struggle with. This one looks very nice. Also would be nice to have a corded one for those times that you want the power and dont want to worry about batteries.

  306. I am a young entrepreneur who is starting his own business and could use all the help I can get so receiving a toy like this would be a great help to starting out my flooring business

  307. This would make a great gift for my father-in-law!

  308. My sister and brother-in-law are redoing their house and could use one of these

  309. Oscillating tools are very useful.Great giveaway.

  310. I don’t yet own an oscillating tool and I would like to. Seems like it would be handy to have around.

  311. I need an oscillating multi-tool, so I’d definitely keep the corded one. The cordless I’d give to my father since he has bought into the dewalt line for his business.

  312. Big fan. Always checking in to get the latest tool news. This would be a perfect addition to my up and coming tool collection. Just moved from a condo to a house. Wow. Tons of work. My 1920 Bungalow needs some wood siding replaced. The tool would allow me to reach between boards and cut nails, etc. — Thanks.

  313. I’ve been wanting an oscillating multi-tool but haven’t pulled the trigger as of yet. This way I wouldn’t have to!

  314. I’ve already got some Dewalt cordless tools and would love to add these to my collection.

  315. Our DeWalt multitool died on us and we haven’t been able to replace it.

  316. Yes please! I think this is the best qd system. There are not a lot of yellow tools that I can honestly say that, but this is one (2 versions) of them.

  317. This would replace the dremel version of these tools I currently have.

  318. I’ve started building our new home and this would come in handy!

  319. Not for me but for my oldest daughter in Austin who is big DIYer. When she was home for Christmas she talked about wanting one of these for some projects she has in mind in the new year for her patio and backyard as well.

  320. Have been on the fence about corded vs. cordless, this would be a great solution to picking one!

  321. Oscillating multi tools are the best solution for cutting notches in 2×4’s for shelving… and my basement needs more shelving!!

  322. A cordless occ. tool… Yes! I already have the batteries for this and there is that gap in my tool bag just perfectly sized for this to finish it out. And the corded one would go live at my apartment building for maintenance. Perfect!

  323. I dont have an oscillating tool, so these would be welcome

  324. I’d love to win this because I am a former oscilating tool doubter. I borrowed a friends at his insistence and have now seen the light! It would be worth listening to him poke fun at me whenever he saw these tools or me using them if I could have not only 1 but 2! Thanks for hosting these give aways!

  325. I’m on the verge of buying this, but i rather save our money for backyard landscaping (which i will be installing myself to save money).

  326. I have a corded multi-tool that i don’t like, always a pain to get out for small jobs. Cordless handy for that. And i have like two attachments cause i’m cheap and only buy for the job. Having some would be sweet. Hope i like the ez-locks more than you 🙂

  327. I need a new oscillating tool to replace my broken one.

  328. I have wanted and needed an oscillating multi-tool since I started monkey’ing around with home improvement and maintenance projects a few years ago. I am addicted to all aspects of trades now and would totally utilize these in all areas! I am working on plans for my own work shop/area and would use these tools for multiple projects I’ve planned in 2018 here are a few: removing old grout, some drywall cutouts, a couple doors I have, removing some trim/molding, smoothing and sanding base boards, interior cabinet cutouts to run some electrical boxes, some outdoor irrigation/ plumbing etc. I would love to add both of these to my limited tool collection. Awesome giveaway btw!

  329. I’m a die-hard Dewalt fan and would love to add these to my small but growing collection in the garage!

  330. The cordless DeWalt OMT was 1 of 2 final contenders for when I bought an OMT. Ended up with the Milw. M18 but I still wonder if I’d been happier with the DeWalt…

  331. trying them out in home depot I agree with you that these are much more ergonomic than other brands. Having a cordless omt would greatly increase my use of one for quick, off jobs. And having the corded is nice for extended work. I want one with some form of quick change head. Haven’t used one enough to justify buying yet but having s quality tool in regular rotation will probably change that.

  332. The wife and I are just starting a project to remove all of the carpet in the house and replace it with laminate. These would be a great help in this project. Would love a chance at these 🙂

  333. I would’ve picked up the oscillating multi tool + a circular saw had I not miss the Dewalt DCK299 with the two free bare tools bundle. The OMT would be handy for many projects, especially when I start my bathroom tile project this summer.

  334. I would give one to my brother and the other to my dad and keep the pliers. Neither of them have one of these and they are so useful.

  335. That corded one would go in my kit to help me tackle some built-ins that I have next on my project list. The cordless would go to my brother, as he uses Dewalt batteries.

  336. Woah,

    2 tools, millions of uses. I enjoy finding new uses for oscillating tools, and would love to move to a cordless unit that matches up to my 20v max tool set.

    The corded version would make a great housewarming gift for my brother in law

  337. Since I already have a multi-tool, I’d be happy to donate these tools to my church for use on the mission trips we take to aid disadvantaged families in rural Virginia! Thank you for the opportunity!

  338. This is the best most versatile tool. I would really like to have the corded option.

  339. These would be great for an up coming project. I had them on my Christmas list but they didn’t make the cut (pun intended). I love the site and the reviews.

  340. Gave my oscillating tool to a friend and have been looking for a replacement.

  342. I don’t have a working oscillating multi-tool (my M12 one broke). I could really use this.

  343. I have a handful of home renovation projects such as flooring and trim/moulding replacement to complete. The oscillating tool bundle would save me so much time which I could spend browsing the toolguyd.com website!

  344. Actually have never used one of these before but always wanted one .

  345. Only oscillating tool i have is form harbor freight 🙁

  346. Never had an oscillating tool, but would like to try one on my bath shower grout repair,

  347. The 20v multi-tool has been on my want to purchase list for a few months now. I have a normal hand drywall saw I use when cutting in new outlet boxes and what not around the house on varying tv hanging projects. I saw a youtube video on someone using the multi-tool to cut outlet boxes in and I was so pumped for it I about peed myself. I regret not jumping on the Black Friday deal for one….

  348. Same comment I posted to other recent giveaways: I had to recently give up almost all of my tools (extreme sadface!) when I moved across 8 states to take care of my aging in-laws. I’ve started re-collecting tools that my father in law didn’t already have. I could definitely use these to make the garage into a shop!

  349. Hi Stuart,
    As a poor grad student, the oscillating multi tool has been on my wish list for a while. I have a project with converting some oak logs into an outdoor end table that this tool would be perfect for!

  350. This is a Christmas list item I did not receive, so it would be Merry Christmas to me! 🙂

  351. I’m heavily invested in the Dewalt 20v line, so this is just icing on the cake. Thanks for all the giveaways!

  352. The DeWalt tools have a great reputation so I would be psyched to have any of the tools offered in this giveaway!

  353. I’d use the oscillating tool to refinish my stairs.

  354. I’d use them to help re-tile an entryway.

  355. I’m a big DeWalt fan and would love this in my arsenal. Thanks for doing these giveaways!

  356. I really need an oscillating multitool but have been reluctant to pull the trigger on one!

  357. These would make excellent replacements for my Tool Shop corded and Nextec cordless multi-tools. And it would get me to finally grab the DeWalt 18V to 20V adapter kit that I haven’t needed until now.

  358. And who wouldn’t want a multi tool from Dewalt? Count me in!

  360. I’m slowly switching to dewalt for my main carpentry cordless tools, so this would be an awesome addition

  361. Thank you so much – this oscillating tool is really great!

  362. I’ve got a Closet remodel coming up and this would be perfect to notch baseboards and drywall. Thanks.

  363. I have seen these in use on youtube but never could pull the trigger and buy one. As a woodworker I think this might come in very handy for some intricate design and inlay uses to my projects.

  364. I would love to win these tools because I like how these Dewal tools are corded. I like the level and the craftsman hand tools. I would use them to remodel my basement project that I am working on. Hope I win, thank you for the opportunity.

  365. My 15 year old Fein died. These would be a great replacement. The idea of using a cordless one on the jobsite is exciting.

  366. I basically only have a drill at home, these would be a great addition.

  367. We use dewalt tools at work and this is one of the few we don’t have.

  368. I’ve got some finish work to fix on our apartment before we move out. This would help a lot in making it look right (unlike the hacks that did the finish work in the first place).

  369. I’ve been looking to pick up some tools, haven’t yet bought into any one system could be this one as easily as the Bosch or M12.

  370. the Dewalt cordless oscillating tool is the one tool I really want still missing from my 20v collection.

  371. A year back harbor freight had a $5 coupon deal for getting their cheapest oscillating tool. While it has saved me a few times, it leaves a lot to be desired in a tool of it’s function. Having not only a corded but a cordless higher end model oscillating tool would be amazing. I tend to work on a lot of last minute, quick fix projects when it comes to building Battlebots/ Combat Robots and props for media. Thank you again for these giveaways.

  373. Just started buying tools for my first house and these would help out. Thanks for putting on a give-away like this!

  374. I have never had a set like this and would love to get my hands on one to test out.

  375. I have a need for a multi-tool. I also have other dewalt cordless items so I could utilize my existing battery/charger platform.

  377. No Dewalt in my collection yet – except for some bit selections.

  378. My dad gave me his Dewalt 20V tools a few months ago when my wife and I moved into our new house. We had a ton of projects we were taking on and the oscillating tool will come in great use for the upcoming flooring projects and redoing the main doorway as the wife wants some different door and you know a happy wife makes a happy life 😉

    Thank you!

  379. These would be great for some trim work I am planning around my house!

  380. We’ve got a few DeWalt 18V tools at work, and this would be a useful addition. Right now we’re using my (corded) Fein OMT, but I’d really like to be able to take it home sometimes…

  381. This is the best reviewed oscillating tool… besides fein likely but still…. best “budget” oscillating tool?

  382. I’d help a friend with a drywall project/repair.

  383. I’d like to win these Oscillating multi-tools. I currently don’t own an OMT at all and since my drill/driver is a Dewalt, the cordless OMT would be nice, especially with the sanding pads.

  384. Just bought an old row house and I know this would come in handy replacing the flooring.

  385. I would love a decent multi-tool. I have a $20 cheapo from, I hate to admit, Harbor Fright (sic). I would off-load that to my son’s classroom where I occasionally do minor projects to improve storage, etc.

  386. I would like to get the set of Dewalt oscillating tools so I have corded/cordless that take the same blades!

  387. I love the convenience of an oscillating multi-tool. The only one I have is from Harbor Freight (it gets the job done and is by bar the best value in the store). I’ve already got 20V DeWalt tools and not having to take an extension cord to the tight spots I end up using these types of tools is amazing.

  388. I’d love to try the cordless and corded back to back on some projects I have coming up. Thanks!

  389. I don’t have any Dewalt tools yet so I’d love to try some out. Plus I don’t have an oscillating tool.

  390. I have a green one, which is a fantastic tool. One thing that would make it more useful it must be cordless.

  391. My Craftsman oscillating multitool stopped working so I would like to replace it with the corded Dewalt. My dad has some Dewalt 20V tools but no OMT so I would give him it. I would like to try out the pliers, too because I often find myself needing different sizes or styles.

  392. It would be a nice addition, I currently use my 12v OMT to cut openings for remodelers electrical boxes in plaster and drywall. I’d like to use the corded version for tile work.

  393. Oscillating tools are great! I keep looking at the cordless DeWalt to continue to expand my DeWalt tools!

  394. I love the DeWalt brand. The only oscillating tool that have is from H-F. It’s okay but it would be nice to this “monster”

  395. My wife would like these for her many, many, many small projects

  397. I want to win because what cant you do with an oscillating multi-tool? also, i could give the corded one the secretly jealous buddies that poo poo the tool.

  398. A NFP I help out with could benefit form the portability of the cordless tool.

  399. I started my Dewalt 20v collection this past Christmas – first cordless platform upgrade in 10+ years. The oscillating tool would be a great addition to my collection!

  400. Ive used these before, best I’ve used, would love to have them.

  401. Remodeling, DIYing and fixing things will be easier with these tools. I’ve used the multitool before and its so nice.

  402. These would make perfect late xmas gifts for a couple friends of mine. the cordless one to a buddy that already has some 20v dewalt, the corded one to a coworker was clueless about the things in the first place.

  403. Been wanting an oscillating multi tool for usage in some cabinet revenovations after they were flooded by my AC unit.

  405. I would like very much to win this. I am an electrician and this would be very helpful.

  406. This would give lots of possibilities for different work.

  407. You should give them to me cause random is so random and I’m so lucky!

  408. Dewalt makes nice tools and this would get a lot of use for almost all my projects.

  409. Why do I want to win? Well, the tools WANT ME TO WIN! They are begging to be taken off the shelf and put into MY hands.

    Seriously, I have yet to be seriously disappointed in a Dewalt tool. But my current oscillating tool, a Rockwell… it’s okay but … well, it’s not great. (I’m trying to be nice.) So my Rockwell will be donated to a makerspace and I’ll keep the Dewalts. I have a 20v charger and battery pack, so even the cordless should see some use.

    And why would I want the EZ-lock pliers that even Dr. Stuart doesn’t like? Well, BECAUSE they look so damn awkward, of course! Maybe I’ll love them, like a pet pug, or a goldfish with those under-eye blisters that render them completely incapable of survival in the wild. Somebody has to love them, so why not me?

  410. I’ve never had the opportunity to use an oscillating tool.

  411. This would definitely be in upgrade over my current multi tool.

  412. I have tried a Ridgid oscillating tool before and it was nice but it would be nice to have one of my own.

  413. I need to expand my dewalt 20v collection and this will come in perfect for some upcoming jobs!

  414. Because I’m poor and can’t afford them but could really use them THANK U

  415. This tool would be an absolute incredible help to me to install hardwood floor, along with install can lights and re-trim my entire house. would also be great to use at work! i work for a large GC home builder. amazing giveaway! good luck to everyone!

  416. These tools would be great since I am stuck with the m18 multi-tool and it’s such a disappointment!

  417. I’m a new first time home owner with twins on the way with a lot to do around the house these would be great to help me finish the trim and doors I am working on.

  419. Aside from a few other DeWALT items I own this Dewalt oscillating multi-tool prize bundle would make a great addition.

  420. I would love to win these for my son. Thank you.

  421. I would love to have this. I’m a electrician, and this would be very handy for work, I would use it every month…it wouldn’t just sit in a toolbox.

  422. I would probably split this with my wife for her tool kit.

  423. I’ve been using other tools to work around my lack of OMT for a while now, but with a few house repairs involving small-area sanding and cutting — and a new kitchen floor — on the horizon, it’s time to get one. Having both corded and cordless would be a real luxury!

  424. I could really use the oscillating tools

  425. Allows me to break into the Dewalt tool craze and join team yellow.

  426. A cordless oscillating multi-tool Would be nice.

  428. I’m interested in the oscillating tools because I have remove some grout in my bathroom and the Dewalt oscillating tools would be perfect.

  429. My DeWalt omt has a lot of miles on it lol this would be great to have her replacement on deck and fill out my attachments reservoir ?

  430. Have to do some floor demo and would love some oscillating tools

  431. I need this tool specifically because my wife forbids it. A few years ago I tried “juggling” this type of tool. Oops, off to urgent care, where my wife the nurse, had to show all the nurses how klutzy her husband, the woodworker, is… the “expert” woodworker… a few stitches, and much embarrassment was worth it. We still look on that evening as one of our best date nights ever.

  432. I’m direly in need of an oscillating tool for some projects I have coming up, nothing major. I love my other dewalt tools,

  433. I really like the quick tool free design of the dewalt. Also the only thing better then an oscillating multi tool is a cordless one.

  434. I have been wanting to get an oscillating tool to use in my shop. This would be a great help in my woodworking. Also, it would be nice to try out the quality of Dewalt tools.

  435. I would love to Dewalt oscillating multi-tools and levels too. They would add to other dewalt tools. I would love too use them for projects around the house. I dont have any powered multi-tools and I wanted to get one last year.

    Thanks for give a ways
    Great website

  436. I really appreciate that you are taking the time, and effort, not to forget the expense to do this.

    I have used a multi tool before and am a big fan of their versatility. I’ve also already invested in dewalt 20v packs so this would fit well with my existing tool. I frankly use the tools for my own builds as well as helping others, friends, family, co-workers etc. with theirs.

    Happy New Year

  437. I have a really weak porter cable cordless multi tool, a dewalt one to go with my normal tools would be great.

  438. I do not currently own an occilating multi tool, but I hear great things about them. I would like to try one out.

  439. I’d give them to my brother who is working on his first home…

  440. I’m missing an oscillating tool in my collection and those would be nice to use around the house.

  441. A multi tool would help me remodel my house

  442. This can help me on my new shop.

  443. I have the corded dewalt and like it so much I could use the cordless multi tool and give the corded one to a good friend as a gift.

  444. WHAT THE HECK ARE THESE USED FOR?? Just Kidding, oscillating tools are on my short list to get next. Just not sure which way to turn. Winning these would head me in the right direction plus make up my mine on what 18/20v system to start investing in next. I have a Milwaukee 12v system but sometimes it’s just not enough power so I’m comptemplating what higher voltage system to go with. My neighbor says Dewalt so we can share tools and stuff…..I think he just wants to take advantage of my good nature ? Anyway, these would be great tools to start with in the oscillating nature. If I don’t win, could you use your connections and get Milwaukee to upgrade their 12v oscillating tool??

    Thanks for all the great reviews and information.

  445. I would love to win this bundle! It would be put to good use during upcoming home remodeling projects.

  446. I would love to add these to my Dewalt tool bag, as a handyman, the has been my platform of choice and is serving me very well. I love my OMT tools and it would be great to get some more accessories for it. I would share the 20V tool with my Dad who really would like to get one and keep the corded one for myself as there are times when cords are better than cordless. Like when you are doing a whole floor of tweaking doorways for a flooring retrofit.