I posted a first-look about the new Megapro Precision Screwdriver earlier this week, and one of the (understandably) common requests was for a size comparison.
Shown above is the new Megapro 24-in-1 precision screwdriver next to one of their standard multi-bit screwdrivers, specifically their 15-in-1 high visibility green screwdriver (purchased via Amazon at retail).
Advertisement
(Note: Megapro is sponsoring our exploration and coverage of their new precision driver.)
Megapro’s standard screwdrivers have wide handles, sized to accommodate their internal bit storage cartridge, which holds 7 double-ended screwdriver bits.
The new 24-in-1 precision screwdriver is much more slender, shorter, and lighter.
Advertisement
Here’s a new graphic Megapro put together, depicting their precision screwdriver next to their ratcheting screwdriver.
Megapro’s ratcheting screwdriver has a more tapered handle shape compared to their standard drivers.
Here’s a selection of different screwdriver sizes and styles, plus an AA-sized battery, to give you a sense of scale.
The Megapro precision screwdriver is about the same size as some of my smallest standard-size screwdriver handles, and smaller than higher torque styles.
If there’s interest, I can include a comparison against multi-bit screwdrivers in my full review.
There is noticeable size difference when comparing the Megapro against more traditional precision screwdrivers.
As mentioned in my first-look, I went from an “uh-oh, it looks too big for me” standpoint to “ah, a bridge between categories.”
There are a lot of tasks where I might reach for a precision screwdriver only to have to seek out another driver style that might be much too big.
The Megapro is a middle-ground tool that can deliver more torque than a traditional precision screwdriver, but also more control and a lighter touch than many full-size drivers.
Battery door compartments are a good example of where a tool like this would absolutely come in handy. Too much torque and you can damage the fastener or part, and too little torque can lead to unnecessary frustrations and delays.
It’s worth reminding you that the Megapro also holds 12 double-ended 4mm hex screwdrivers. This means you get 24 screwdriver bit sizes and styles without requiring extra storage accessories. Internal bit storage can be an incredible convenience.
Here’s a quick image of the screwdriver with one of the bits inserted into the holder.
Finally, here’s a comparison between the double-ended bits, and a Wiha-branded hex-tip. You can fit standard 4mm hex “micro” style screwdriver bits in both the Megapro’s holder and in the internal bit storage cartridge.
The friction-fit feels a bit different since you’re engaging the retention mechanism earlier with a standard 4mm hex bit than with Megapro’s double-ended bits, but as far as I can tell there’s perfect compatibility.
I have not yet tested whether the Megapro bits fit other 4mm hex bit holders and screwdriver handles.
In case it saves you a visit to the other post, here’s a list of the included bit sizes and styles:
- Hex 1.5, 2.0, 2.5, 3.0 mm
- Pentalobe P2, P5
- Phillips PH 000, 00, 0, 1, 2
- Slotted 1.5, 2.0, 2.5, 3.0 mm
- Torx T3, T4, T5
- Security Torx T6, T8, T10, T15
- SP 2.6
- Triangle 2.3
Price: $36
ETA: Mid-August 2021
Preorder via Megapro
Buy Other Styles via Amazon
Read More:
New Megapro 24-in-1 Compact Precision Screwdriver – First Look
salmon
Some imperial hex keys would be welcome instead of the spanner bit, triangle, and pentalobes.
Joseph Atkinson
Awesome, I really appreciate the comparisons. I pre-ordered mine as soon as I saw it on their instagram. I love Mega-Pro and I’ve given quite a few out as gifts. This looks like a great addition to my tool. I’m glad that the bits are not proprietary and I can swap the pentalobe, spanner, and triangle out since I never need them day to day.
Mikedt
it may be useful, but I find an awful lot of mini-screws are deep inside a narrow passageway that would preclude using a bigger shafted interchangeable bit screwdriver.
Corey Moore
I want to say Klein made an extended length bit variant of the precision multi driver for this purpose, but I’m not sure if I’m remembering correctly. I steal rep samples of “tweakers” or “techie” drivers constantly, as well as always having 2-3mm straight shank weras in my go pouch anyways.
Fish_Stick
Have a couple of precision drivers with that exact issue, sure the bit is the right size but it won’t fit in the recess. Someone recommended a Nanch set when I brought this up on another post. Can’t say a ton on longevity but the bits are thinned out and I haven’t broken a bit yet for the few projects I’ve used it on.
Corey Moore
I always thought of megapro (or Dotty tool as we called it per branding purchased under) as the screwdriver equivalent of “safe mode” for a computer. Super big and duplo-ish but ultimately functional lol Amused to see my suspicion that a precision megapro would be about the size of a regular driver has been confirmed.
Fish_Stick
That’s a good analogy. Picked up the black eclipse version after reading good things and really disappointed with it. Grip is not comfortable and overall feels very cheap from the handle to the actual metal shaft. Bits so far seem okay but don’t use it enough to tell. Would have been much happier with the Wiha.
David Zeller
You don’t happen to have any of the Victorinox knives that use 4mm double ended bits, do you? They are unique in that their bits have a ball bearing in them. People are always looking for bits that work in them that don’t fall out easily, as ball bearing bits are near impossible to find. I think it was Wiha that at one point sold them, but not any longer.
I was wondering how well these might stay in.
Tim B.
Thanks, Stuart! Appreciate the size comparison, especially with the other precisions (like the Wiha and Wera).
I don’t let my wife and kids use my higher-end precision sets if I can help it, which has usually meant keeping cheap multi-bit kit in the kitchen drawer for them or myself to quick grab, and inevitably gets left out, bits lost, case damaged, etc… which is one of the reasons my original MegaPro has permanent residence there. This looks like pretty much the perfect complement.
Jared
Thanks for posting these photos. That helps a lot!
It is certainly larger than any regular precision screwdrivers, but with the way the handle tapers I’m now thinking it should work just fine for lots of precision tasks. I really like the look of this new Megapro – that many precision bits in a single screwdriver would make it the perfect household or tool bag precision screwdriver, even if regular precision drivers would still be preferable in the shop.
VindalooDiesel
Thanks for the picture comparison. This just upgraded it to an automatic buy.
Our chanellock branded megapro has been one of the most frequently used drivers in our kit.
PETE
I’ve been a megapro fan for years. Can’t wait to get one. I’ll have to get one for my coworker too.
Gordon
You said it’s a bridge between the two sizes, and I think that’s perfect. I have been looking for a screwdriver that has a smaller handle, but still has common bit sizes like PH2. My daughters are getting involved with all my projects but find “adult tools” too frustrating to use. I was looking at the acetate handle Craftsman’s but none seem to be just normal small screwdrivers. You either have a PH2 stubby, with a large grip, or a normal PH2, which is too long, or a nice small precision screwdriver, which has a max PH1 . I’d love the grip of a precision, on the shaft of the stubby.
Bob Le
Made in Taiwan… I was hoping to upgrade but I think I’ll stick with my boring but decent precision screwdriver set in the iFixit Pro Tech Toolkit.