To celebrate Milwaukee’s recent Packout expansion, we’re holding a giveaway where you could win a Milwaukee Packout 3-drawer tool box and racking kit!
Prize Package: Milwaukee Packout Tool Storage Combo
Advertisement
Milwaukee’s 2- and 3-drawer Packout tool boxes have been long-awaited by users, and so far it looks like they delivered big.
The Packout drawered tool boxes are so new that I still haven’t seen them in person yet. What this means is that the two lucky winners will be among the first users to get their hands on this new Packout gear!
The 3-drawer Packout tool box features a locking security bar, 50 lbs of weight capacity, ball bearing drawer slides, quick-adjust dividers, reinforced corners, and it of course connects to a wide range of Packout accessories.
And, the prize package will also include the new Milwaukee Packout racking kit, complete with two vertical E-rails and two shelves.
Are you looking forward to boosting your productivity with these new Packout products? Thanks to this giveaway, you’ve got your chance to win them!
Advertisement
You can learn more about these new Milwaukee Packout products here:
New Milwaukee Packout Tool Boxes and Accessories Coming Soon 2020/2021
Winner Selection: (2) winners will be chosen at random.
Prize Fulfillment: Milwaukee Tool will be sending the prizes directly to the winners once they launch and are available for shipping.
Entry Details: In a comment, tell us why you would want to win this Milwaukee Packout 3-drawer tool and parts box and racking kit. How would you put it to use?
Entry Period: 1/21/2021 thru 11:59pm ET 2/3/2021
Rules: Contiguous USA addresses only. Entrants must also fill out the following form, which will only be used for prize fulfillment purposes. One entry per person.
The tools featured in this giveaway were announced as part of Milwaukee’s Pipeline series of digital events last Fall. Here’s a summary of all the tools included in Episode 2:
New Milwaukee Packout Tool Boxes and Lasers! – Pipeline Rundown 2
Milwaukee also announced their new line of laser levels in the same episode, read more about them here:
Can’t Wait? Buy it Here
Packout 3-Drawer Tool Box via Tool Nut
Packout 2-Drawer Tool Box via Tool Nut
Packout Racking Kit via Tool Nut
Cory Graves
I would use this to organize the hand tools I need for switch gear and panel changes.
Jon98
Would be used in home workshop to keep hardware organized. Already use packout organizers in roll cab for at a diesel repair shop for my electrical tools.
James Nieto
I plan on using the Milwaukee Packout Tool Box to organize my new M12 Milwaukee Dirll/Driver and Impact Driver that I recently received for Christmas. It will also help organize the accompanying accessories. In addition it will also be used to organize my trusty M12 3/8 Ratchet and its accessories.
Andrew L
Organize some hand tools into different categories for different jobs such as electrical, plumbing, ect. Thanks!
Joe J
I’d use it to get rid of my awful mason jars i use to organize stuf
Charvin B.
I would love to win this packout drawer kit as I would use it in the garage to store my impact wrenches and socket sets.
LennyBaker
I have an amateur basement woodshop. I have been slowly converting over to the milwaukee brand. Apart frm the hand and corded tools I have been standardizing on their 12v platform, they are just right for my needs. I would mount this in my workshop and store things I routinely need in my shop as well as for home maintenance. This would centralize common items and be easily portable.
Mark Donahue
I’d finally organize all my random jars of fasteners so I could find the right one without dumping them out on the workbench
Anthony
I’m not a full blown milwaukee guy but I’m liking what I’m seeing..I might make the switch because milwaukee is showing innovation that I’m not getting with the other brands
Maxwell Steck
I work out of my truck so every bit of organization helps. I would use this to organize my hand tools and keep my batteries together.
ATN
I am a mobile mechanic working out of a minivan. I currently have a metal tool chest mounted in the back for rarely used tools and supplies. I use tool bags for my commonly used tools which I carry to the customer vehicle. I’ve been waiting for the drawers to come out to see if I want to switch to the Packout system.
Steve
It would allow me to better organize my fasteners for installs and would expand the versatility of my current packouts and packout bags. I use my packouts for electrical, plumbing, and coax work
Joshua Blaschke
I just purchased a trailer which I need to outfit with a storage solution. I feel like this may suit my needs better than traditional shelving.
asko
I would use this to finally stop carrying my tools in toolbags, and start getting properly organized with packout!
JakeR21
I would use it to organize all my electrical connectors and tid-bits that I use to work on my project car. I’m finally going to be ordering a pack out set after seeing all the cool modifications people can do to them. It will be helpful also on the job site
Brandon B.
This looks like the perfect size and format to be mounted next to my 3D printer. Can keep an assortment of screws, bearing, springs etc for taking measurements for modeling in CAD, and all the printer tools and accessories will be in one place up and out of the way instead of on top of a work surface.
Avi
I so want to, but then I’ll have to replace all my dewalt toughsystem cart and boxes and you already cleaned me out with all the great sales this winter
James C
Thos would help me organize my shop / garage. Sometimes when I do find time to work on a project I get completely stalled by the mess.
A. R.
I usually use tool bags/backpacks over tool boxes for better orginized setups. This would change the game for me. Would love to have this to finally have a toolbox than I can orginize much better!
matt s.
I could finally get all of my small boxes off the floor! Sweet.
Kris Taylor
I have been looking for a well-built yet portable way to store my ratchets, sockets, and wrenches and these Milwaukee Packout Drawer boxes are hands down the best solution.
I would mount the shelves in my garage and put the Packout Drawers onto to shelves. Then, when I need to take the tools to the track or to a buddy’s house, I simply pull the Packout box off of the shelf and put it in a vehicle. Simple and it prevents me from having to have a set of “garage tools” and a set of “mobile tools.”
Steven K.
I would use this to replace the old storage box I have all of my nuts and bolts in. Also put all of my model building kit tools in also. I have this stuff scattered among different bins due to lack of storage space.
Callum
This would be great for organizing wood screws.
Bruce Bufford
This looks like an amazing product. I use a lot of small parts, hand tools, and diagnostic gear for microelectronics projects.
Knowing it’s made by Milwaukee means it’ll hold up to daily use — a lot of other small parts drawers tend to sag, have poor sliders, etc.
Plus, if I got one, I’d be “obligated” to buy 2-3 more so my entire shelf is consistent. What a horrible (great) problem to have! 🙂
Chris H
I would use this for a mobile work station! I have 2 rollarounds but nothing portable I can keep smaller things in like sockets, bits, etc!
Addison
I would integrate it into my Packout system, and would use it for common used fasteners. I work out of a pickup truck, my tailgate is my bench, Packouts are my tool boxes, and supply organizers, being able to get into this without removing a Packout would be awesome!
Marco
I would use the 3 draw pack out for my drill/impact and all my driver bits, drill bits, hole saws, and anything that my impact/drills can take. If there was still room dedicated a draw to sockets. The rack would be great for my packout totes full of tile tools I switch in-between. I would mount it on the inside of my mini van.
Stephen
My tiny garage is at its’ limits and I need to get stuff off the floor. The shelf and box would be perfect to help with that task! My M12 tools and assorted bits/blades/cases would fit perfectly.
George Panhoven
As a support tech, I would use the Milwaukee Packout 3-drawer tool box to keep my most commonly used tools and spare parts together in one convenient place.
Bill
This would be a great addition to my current packout system. This will prevent me from tearing down my current packout to get to some of the items i have in the large rolling one. I currently have an addiction to packout. Its taller than me. But this would be a huge benifit to my setup. Being in the field daily, packouts help keep me organized.
JimL
I’m making a work station to put on top of my table saw for my push sticks and table sled. I think this would be a perfect addition to where I could organize jigs and spare parts.
John Shakon
This would be great for garage storage. I have a few packout cases but they are also put away in shelving and aren’t always the easiest things to access. The drawers especially would be awesome for fastener organizing.
Tom M
These would go right on the wall of my shop directly next to my workbench. Best of all, it’s easy to pull out the whole 3 drawer setup and throw it in the truck for when I get called out to help a friend with a project.
Matthew Schulz
I want to win this Milwaukee Packout 3-drawer tool and parts box and racking kit to help me keep my tools organized in my garage. It will also be useful that if i need to take the tools with me I can just grab the whole thing and put it in my vehicle.
Adrian
This would let me keep my most used tools in a proper toolbox that was still easy to transport to whatever I’m working on. This will be perfect paired with the rolling toolbox for bulkier items!
Tyler C
I would use this to help organize my garage as I try to get into wood working and have all kinds of odds and ends pieces.
Steve Cecil
This would be perfect for organizing all of the small connectors I use in AV installs
Steve Goodman
Would use to organize driver bits and common drill bits, collets etc
Wolka26
This would make for a fantastic tool and spare parts organizer to take to the motocross track on weekends. Currently using an old 2 drawer craftsman tool box and an 18 gallon rubbermaid tote. The organizers would be good for spare bolts, clutch levers, etc and the other drawer(s) should hold all of the hand tools I need. I would likely pair it with a rolling deep box and use that to store larger items like chain lube, quarts of oil, and air filters
Ian R Connick
I am about to move across the world, and i have been eyeing up one of these 3 drawer units for condensing my handtool/toolbox collection into. Packout seems appealing due to its relatively light weight (compared to Steel boxes), extremely modular ability to be reconfigured, and availability in europe (black plastic over there too :o). I just invested in a couple lowprofile organizers and a couple small parts organizers. The wall mounts and 3 drawer setup would be an excellent compliment to these.
David
I’ve been on an organization kick as I re-design my workshop. I’ve got a bunch of Milwaukee’s storage bins, and I’m starting to dip my toes into the Packout side of things. This would be an interesting option. Thanks for doing the giveaway!
Josh
It would go into the small woodshop in my basement. Space is at a premium but this would fit well and give me a better place to store hardware and tools that are needed when working outside of the shop.
Pink porkchop
My 11′ x 18′ “shop” needs all the organization it can get. Stacking and unstacking my boxes gets old quickly.
John B
Good luck to those who actually need it. I’m just a home owner diy guy. I preordered one just to check it out.
Gregory Sutton
I’m getting a bigger workshop, this would help it to be better organised.
Paul
ahh this would compliment my existing packout products. have really been looking forward to the drawers for quick access of small items. a perfect product for my garage to keep small electrical and commonly used hardware at a drawer pull away.
Adam Argue
This would be great to organize all my HVAC fittings and parts!
Rich Pantoliano, Jr.
I just moved into a house, and am trying to organize all of my tools that used to be shoved into an apartment closet.
David Zeller
I think I’ve mentioned before – 20+ years of undiagnosed Lyme has left me with neuro and cognitive challenges and I’m on disability. I’m always trying to figure out how to make my shop easier and safer for my needs. I can seldom afford items like this (just did a Harbor Freight run for some org boxes this week for another “idea”!).
Would love to try this!
Nick Zepnick
I would use this to build out a “general fastening” kit, complete with my drill and driver foamed into one drawer but then the actual bits in another drawer (and the batteries / charger in another. Thanks for this!
Tim E.
I use a tstak dolly with drawers for a rolling cart to take to robotics competitions, and off-season, as a work cart to take around to small house or car projects. Now that there’s the M18 packout vacuum, I want to make a packout cart for the around the house stuff instead, since the bigger drawers will be more useful. I’ve been using the dolly with the M18 vacuum, same-sized tool box, a couple of the organizers, then a crate and work top as my “roll around” set. But I wind up having to put the vacuum on the bottom, and still have to unrack things to get to the lower boxes, and usually put wrenches and sockets in an organizer for now. With the drawers, I’m prepped and ready to put drawers on the bottom of the stack for tools and parts, then the vacuum and probably the light, then have the crate and worktop on top, since I take the crate off usually anyway. Excited for these to come out!
Alex
Thanks so much for this opportunity!
One of the biggest things that irks me with the packout system is the bottom toolbox. the only way to access it is by removing all the other boxes. i feel like the drawers is the answer for me. i would leave it on the bottom of a dolley or the 2 wheel cart and then i can stack the medium sized packout on top (which for me weighs a lot and i would much prefer to not have to strain myself this way just to access the bottom box).
Jason Bardis
I’ve been using Dewalt storage containers (suggested and reviewed here) and have enjoyed them. Never used the Milwaukee system but have used their other products at work (bits and corded drills) in an aerospace company. Was the only product that would last. Be interested in trying them out. Especially in my new detached garage being built. Yay!
JC
I need something for the classroom that I can organize the students’ materials (Raspberry Pi) and grab to go when we move locations for projects.
Amanda
I’d get started on garage organization! Just bought a new house with a big garage and am acquiring all the tools required for homeownership.
Brian Collins
I’d use this 3 drawer unit as beginning tool storage for my 15 year old son. He already has some tools. This 3 drawer unit would be the start of a lifetime of Milwaukee based tool purchases!
John
I would use this to organize all the small parts, hand tools and even soldering equipment. I have very limited inside work space and constantly have to drag tools, parts, equipment to my outside patio for working during good weather. Then have to bring all the items back inside at the end of the day. For projects that take many days, this gets old very fast.
AlexV
I’d like to organize all my bits and small hand tools in my garage/shop.
Eve
My Husband does roadside assistance for his business and hes been talking about the packout rack and drawers. It would be such an amazing surprise for him to be one of the first users and to get it for free!
Scott K
I am in the process of building a new workshop and space is very limited. I’d love to have this to help efficiently store hand tools. The racking system would free up some bench and shelf space. The ability to grab this off the wall and bring it where I’m working would be amazing. Awesome giveaway!
Bryan hill
I would love to have this in my garage for the times that I am called to a family members house to fix a cable connection, hang a picture, or do some kind of electrical repair. This would be a great addition to my other Milwaukee tools and storage solutions
Justin Briggs
I am a young apprentice looking to get into mobile mechanics and I am looking for an easily portable form of tool storage till I can afford a service or flatbed truck. I love the milwaukee brand and I have been looking at the packout organizers for a bit now and would love to receive these to become my first form of portable tool storage.
Nathan Ranck
I would use it to store my screwdrivers and wrenches. I currently use a bad system that is one more wrench away from bursting the seams. I love the packet system and the wall Mount is icing on the cake.
dale
A far better option than a pile of loose bits and pieces in a big bin. Looking forward to see them for real!
Mike Perry
Trying to organize my Garage after a fire. This would come in handy.
Kyle Maher
It would be handy to use in the shop to set up a “GO BOX” for things used in the shop and out on the farm. I’m thinking a small assortment of screws and electrical parts. It would save multiple trips back and forth. Mounting it on a 4 wheeler would be really nice.
Sruli Rosenberg
Would be great when working out of the car and not have to unstack everything!!
Jons
Perfect way to start organizing my new garage!
Tim
What a great addition to my packout collection this would be! I would attach this to a garage wall and organize all my small parts and then would be able to attach it to the rest of my collection for portability.
Ross
I’ve been wanting these ever since I saw them. I am currently using my garage as a workshop and drastically need organizational space. I occasionally travel to work, and it would be so nice to not have to move all my tools from the chest to other boxes to take with me.
Aaron
Drawers are the reason I chose tstack for my primary kit in my vehicle. Packout is much more rugged, and now that it actually meets my use case a drawer system would replace my daily use boxes. I’d move my m12 tools into brand appropriate livery!
Mark Matthews
I would use this as an entry into Packout to help the FIRST Tech Challenge youth robotics team I mentor organize their traveling tools used when they compete away from their workshop!
King duck
I want to win it because it because free is awesome just like these drawer pack outs I’m buying a set to organize my drill and driver bits and other little tools needed for jobs away from home. If I won the wall mount system I would probably mount it in my trailer to organize tools in there.
Mike C
Organize all the nuts and bolts scattered through the barn.
Iron-iceberg
I’ve been waiting for this since they first showed us the Packout system
Cant wait
Derek
Oh wow, I hadn’t seen the shelf support. I need this to organize my woodshop. I have to get rid of my standard floor shelving since the new jointer takes up that space. I have nowhere to put all of the little things I need.
Tool Junkie
I’d use it to store my tools and assorted loose screws on the wall!
Brian A
I would use the drawers to collect and have accessible all the parts and accessories for all my M12 & M18 tools. The racking would be great to get a few things off the garage floor to make space.
Michael
Will use the rack mount to (hopefully) save some precious bench space in the garage.
Kevin Sowell
Man, oh man! I’ve been getting a good bit of packout gear this past year and I am in desperate need of a drawer system. I’m a LV guy and I’ve got so many dang parts from telecom to networks, access control, fire alarms, security systems, cameras, conduit connectors, faceplates! You name it I need 30+ on my van at all times to avoid trips back to the shop. And to be able to bring my drawers on site would be next level! Ive got a mounted drawer but I have to pull parts from different boxes and stuff it all in a cardboard box to bring in. If I had the drawers I could just leave the parts in their organized spots and bring the how kit in! Less mess, less stress, works best!
Dcbalex
All my shockwave cases need a home, along with all my other random bits and sets.
Leo B.
I would use this for organization, and it would be great if I didn’t have to open the rolling Packout every time I needed a blade, battery, sandpaper or the drill and driver. Quicker access would be the name of the game, and I think my Milwaukee tools would be right at home in it. Fastener organization would be amazing, and I’ve been in the process of organizing the garage, so the racking would be a very helpful addition. Thanks for the opportunity to win!
Ed
I usually say more than I need to, so…
more organization,
more portability,
I’m here for it.
bryant
I’m a new homeowner and I’m beginning to plan out my small empty workshop. The Milwaukee packout 3-drawer tool box with wall shelving rack would help me get started!
Jason E.
I have been looking into this system for a while but haven’t pulled the trigger just yet. In the HVAC field, we use numerous small parts: fuses, wire nuts, screws, etc. This looks like an ideal storage solution for those parts rather than the small buckets rattling around in our trucks and vans.
Luke Davidson
I’m just an enthusiast who collects all things Milwaukee. I’ve got ~20 M18 tools and 14 batteries. I have nothing Packout yet, so please don’t pick me as a winner. As soon as the seal is broken I will have no choice but to keep buying additional Packout pieces to build up my collection. My wallet can’t handle that!
MoogleMan3
I have a perfect place and use for this set!
I’d use it to organize my “DIY Kit” screws and small parts. Right now, I just have them in the organizers. Drawers for them would be amazing. They’d go on the wall in my tool room in my apartment; if there’s room between shelves on the racking kit, the drawers would go on the bottom, with one of the toolbox packouts with kaizen foam for my drill/impact, tape measure, level, etc. Basically my home repair setup. Rihgt now I have everything scattered in packouts and plastic steralite drawers. I’d love to unify everything! Thanks for the giveaway!
VJ1776
Organize Organize Organize 🙂
Adam
This will help sorting my bits and fasteners and getting everything better consolidated. The portability on the Packout is a huge plus.
kevin lebel
would like to offer these to my electricians. seems like a good way to be “tidy.
OldDominionDIYer
As the renovation of our church continues these 2 & 3 drawer Packout Units would greatly improve our organization and the quicker access to certain tools and the wall brackets will be installed in our “tool room” to make for easy ready access for tools not needed to be moved around!
JamesW
This Milwaukee Packout 3-Drawer Tool Box + Wall Shelving Rack would completely reinvent my life.
My daily life is agony due to a debilitating case of SLORT (Severe lack of red tools). Tight budgets mean that I have been relegated to the aisles of harbor freight never to prance, and purchase, through the rich red lanes of Milwaukee tools. Fortunately, SLORT has a cure and while many recommend more cowbell the ONLY treatment is the rich red nectar of Milwaukee equipment. This giveaway would be the first step on my road to recovery and team red nirvana.
Dan2Jen
This would be great for organizing all the small irrigation parts in my work truck.
Andrea
I would like the drawers and the rack to keep all my hand tools more organized
PETE
This would compliment my other packout boxes, tool bag & cart so i can use it to complete the finish carpentry on my house. I’ve been asking for these for a LONG time.
Dan Watson
I want it for storing my go to tools, it would certainly make organization for tools on the go alot easier. I would hang it on the garage wall and when I need to help a friend or family member with projects I could easily take the necessary tools to the project with me.
Matt J.
Be nice to finally have a better organization system for my commonly used fasteners than my cheap HF wall-mount bins. I have a bad habit of kicking them and spilling them everywhere mid-project and when I buy in bulk quantities they don’t work at all. This would go a long way to helping clean up the fastener disaster that is currently all over my workbench.
Joseph
I am a just about done building the first workshop space I have ever built or owned (that wasn’t my living room). This would be the perfect place to start organizing the space instead of in the boxes on a folding table.
Brian S
I’ve been wanting to build a rolling parts cart for some time using this type of storage where I can easily pull out a carry bin of often used fasteners, etc., to take to other locations….
Clay
Would love to have this to keep smaller parts organized in my shop but easy to transport over to the school when I need to work over there.
Will labosky
I would use it to store hand tools in instead of inside of traditional tool boxes
John
I would use this to bring (some) order to the mayhem that is known as my garage.
Patrick
I’d use this to start a fastener collection, so I can finally stop making small trips to the store to buy as needed, since I don’t have much good storage.
Pinetar26
I think the drawers idled with electrical connections/fittings/switches/etc. On a rolling dolly, would be a dream come true! The rack would help organise my garage much better!
John S
I live in a small rowhouse in the city with a VERY small (10×10) garage to store all my tools and bikes, so traditional tool chests take up valuable storage space and are not portable for all the projects I do away from the garage and home. I’d use these packout drawers and shelves to fully modularize my tool storage for usability both in my tiny garage and on the go!
Rory
Already have a few packout cases to organize random screws, bolts, cat5, and coax connectors and what not. I have one of the wall plates to mount some in the garage. If I win this I’d have more room to put the inevitable extra pieces that are still laying around and get them stored away up on the wall.
Albert
Just bought a house and didn’t have many tools in my inventory, started buying stuff for the remodeling and now I don’t have a good place to store everything, this would really help me out before my tools rebel against me and kick me out of the house for not having a proper place to be stored.
Charles Snyder
This would be a welcomed addition to my service vehicle. I would use these for parts and accessories in the commercial and industrial hvac repair industry.
Ashley Manson
I use my Toyota Land Cruiser as my mobile mechanic vehicle and it would be quite nice to replace all of the miscellaneous buckets filled with tools with some proper organization.
Dave Schwartz
We have loads of TStak boxes and drawers around the shop. I’d love to try some Packout toys for comparison.
Frank D
Thank you for organizing the giveaway.
I would love to try out both!
I have never been thrilled with the deep regular boxes and think the drawers could be the ticket to organize hand tools. I wouldn’t use it for parts. I have my modded & upgraded organizers for that.
The racking system, I’d love to try them, to see if I can install this in my (personal) van to elevate some items, prevent them from flying around, keeping the floor free … and see if it is compatible with other track rails.
Nathan
I’d use the rack mount for sure probably place this above my roll around. I might put all my 1/4 drive stuff in this. Then I have it organized in a box – that is removeable from the wall. Looks like I an organize as I want to.
This way I can grab that box as a kit, with the wall rack I might add to that another 3-4 boxes for other bits and do away with my small roll around.
Well no that would be crazy I’d just put other stuff it it. YOu know I might repurose the roll around (it’s a smaller 31 inch job) for wood working stuffs.
Regardless it would get well used, thank you.
Nathan
These packout drawers will expand my set and make it easier to get to hand tools without unstacking. They improve mobility and keep work area footprint smaller which is especially helpful on some jobs. The racks will be great for secure temporary storage in the van and the shop.
Nathan
I’d use it to organize tool boxes for specific home improvement projects. Plumbing, electrical, picture hanging etc…
RAFAEL R
I have been looking forward to the drawers because in my opinion it would be better to store both tools and screws or bits and blades. To start off, I would use these to store most tools like jigsaw, multi tool, drills, screws and blades or bits. I feel like you have better access with drawers then having to unstack the regular Packout.
Champs
A couple more pieces of Packout would make it integral to my winter basement organization project AND get the thumbs up from my other half.
Brian BNYC
I would use this for better organization of hand tools and select M12 power tools. Finally won’t have to take apart a whole stack to grab one tool out of a lower box!
Ed
We just moved into new home in Round Rock TX and I am going to change out my garage storage/use from the previous owner. I have identified lots of projects for the house and yard that will require a variety of fasteners so I will take the dimensions of the wall rack and modify my work bench/rolling tool chest area for mounting the packout racking to the wall. This will create space for the various fasteners I have and will buy to be in one place along with my Red Helix drill and driver bits, box cutters, tape and laser measure and small box level.
Etienne
I would use it to organize my ever messy pile of tools and projects in my tiny 10×8 workroom, which also holds the water heater and deep freezer!
BobM
I’m looking to switch my tool storage needs over to Packout, this would make a fantastic addition.
Robert Landrigan
This would make my life so much easier:) I have two Packout stacks, one on the rolling base beside the bench and one stack underneath the benchtop – the drawers would stop the restacking frustration and keep tools in the cases as opposed to precariously balanced awaiting time to pull cases and load back in.
MarkerB
I need an excuse to move away from Dewalt storage. This would look nice with all my Milwaukee gear
GML
First of all, thanks as always Stuart. This would be used for tool, fastener and miscellaneous storage both at home and for working on remote projects at other places.
Travis
Obviously it is impossible to know exactly where it will fit into things until I see one in person but I like the idea of using it for fasteners (at least the common ones.) I like the idea of wall mounting it in my shop and then being able to take it on the road for some work projects as well as helping friends and family. Would be nice to be mobile with it. Either way, I am excited about the new drawer options from Milwaukee.
PJB
So I am in the process of starting a series of house renovations. I will be “camping” my tools out in various places during the renovation and the Packout system is so great for moving things around. I feel that this drawer system will be a fantastic addition to my collection of packout items and continue to “enable” my organizational tendencies… Thanks Toolguyd for all that you do to help me buy more tools!
Michael Triggs
I would use the drawer set for my cub scouting rocket supplies.
Dan Perry
I would like to reduce the restacking when I need something out of that packout case on the bottom.
Mike Cheung
We’d likely use this as a seed to start a packout collection. There’s a never ending tornado of parts, fasteners, tools etc. spread out around the shop, any and all organization is welcomed.
Julian Tracy
i’d use that setup as my electrical wiring kit. the drawers for the small consumables and a stock of basic gfci’s, switches, outlets and covers. then i’d install some wire hooks on the underside of the bottom rack to hang rolls of romex.
The top rack would probably hold an open top crate for a catch all bin while on-site and i’d probably add a couple of the compact bins for specialty wiring needs, like cable wiring or automotive wiring kit
salman saleem
My packout boxes and toughsystem 2.0 boxes are in my home office hogging up space lol . This will help me move all of it to my garage.
Joe R
I would store all my amazing Milwaukee M12 and M18 tools in them. The sliding drawers would shave my back from having to down stack my current Packout system. Thank you in advance for picking me as the winner!!!
Travis Davenport
Looking at getting better organized in the shop, would work great for those items that always get used
Chris
I would use it in the garage to organize my home shop tools.
Sam Vera
Hello I’ve been eyeing these packout system forever.I personally used to have a dewalt guy tough case but sold it since I work in an office now. I really want to get these for my dad.My dad has been a foreman and he’s been working as an electrician for over 40 years i n the same company and just recently he was laid off of his position by force by the other employees because of his age. I want to go into business with my dad and venture out. This requires me to put my tool belt back on and get my tools in use with an organization like this this would be so much helpful. I know my dad would love this and I would too as organization is key to being productive and keep building a packout system.
Ted
I’d love this!
galyn
Proper storage and organization are crucial. Milwaukee Packouts deliver that and more. My favorite method of keeping my tools and ‘goodies’, safe, dry and ready when I need them.
Joshua
I would be able to get easier access to things that I get into daily in the shop. The racking kit would make it super simple to take the unit from the wall to the stack for mobile use!
uuinn
my drawers would go straight onto the packout dolly, for commercial electric installs
Deek619
I would love to have this to replace my beat up old coffee cans for keeping hardware together and bringing it with me.
Sean
I would use the Milwaukee Packout drawers to organize all of my fasteners that I use around the shop and on projects. It would be a great addition to my other Packout boxes that I used to store my Milwaukee M12 tools in.
The boxes are fantastic.
Ross
I would add the drawers to my work van. I made a few drawers with wood, and love having drawers in there, I will add more eventually.
JR3 Home Performance
I’d resell it or maybe just put it in a work truck
Will
This would be great to organize my fasteners
Andy
I just finished building a shed so I can get all of my tools out of our one car garage. Soon I’ll be able to actually use the garage to, you know, hold a car. These Packout boxes would be great to use in the shed to get stuff out of the garage and organized in the shed. I could see myself using this in my basement shop as well and the portability would be really nice.
Alex
As a job leader of a small electrical team, I need to supply guys with wire nuts and a variety of screws and fittings. Great way to keep things organized in the van and on the job site!
TonyT
I would use it to store, in a more organized fashion, my frequently used hand tools such as crimpers, wire strippers, hex wrenches, and screw drivers.
I’ve always liked the idea of stackable drawers, and would love to try out the Packout system.
Daniel Crandall
I hate to say…I am currently going through a divorce and can no longer have a tool chest. I have been accumulating a few Packouts to serve as a makeshift tool chest of sorts. This would help restore some of the tool chest functionality that I’ve lost.
Sam Tausz
I’d love to win the Packout Drawer System because it would be a perfect addition to mu rolling crate and medium storage box. As a carpenter you have a lot of small miscellaneous tools and fasteners and having a drawer system would be the most optimal method for organization. It’s also a bonus having that red and black color way and being able to show that off on the jobsite.
For nails I currently use an old ammo box that was given to me, but adding a drawer system to the Packout system would make my system much more clean. I would also transition to putting my pry bars, drill bits, and other tools such as pliers.
As for the wall mount, that would be awesome to hang in the garage somewhere and attach my Packout crate onto.
Marvin Haines
I am in the process of reorganizing all of my garage storage and making them easily accessible to put in my truck when I need them at a job.
GG
I have used Bosch lboxx system so far, but I have to say as I acquire more they become more inconvenient.
The wall racking kit of this is exactly what I am looking for in a storage system!
Jason Gloekler
Would aid me in home remodels, keep all my hand tools and supplies handy on my packout setup I already have.
Kevin McKenzie
My youngest daughter is now two, so I’m finally getting started on organizing and putting away things after we moved into our house five years ago. The Packout drawers, along with the wall mounts, would help a great deal in doing that.
Nick
Have so many little parts and boxes in my garage that would go great in these to help organize it. Always like trying to keep things clean and organized in garage since I have to park a car in it also!
Tom D
I have sockets in the Packout case now so I’d be moving a lot of the things that are in the tool chests now – hammers, screwdrivers, etc.
Minh Vuong
I heard this is the best system! Love to have it to store and transport power tools and accessories
John Tripp
I could finish building my pack out to the ceiling
Wil G.
I would use this to organize my electrical supplies.
David N.
I’d love to get all of my handtools out of a go bag and stored properly. Especially around the workbench, been meaning to build drawers for my bench and just haven’t gotten around to it. Pre-built drawers!
Michael (the other, other one)
The 3-drawer tool and parts box would allow me to organize all my small parts – nuts, bolts, screws and etc. The racking kit would allow me to store those small parts out of the reach of my young kids.
ChrisK1970
I’d use this for over landing in my Jeep Gladiator!
Christopher Grovo
I’d use the drawers to consolidate all of the loose hand tools I have running around, and the shelves would go to getting all of my small parts packout cases off of the floor of the shop!
Joshua
I’m in the process of setting up a cargo trailer for tool storage and organization for my newly launched handyman business. These would come in supper handy for a lot of the smaller items.
A W
I saw these on Toolnut and they look awesome!
I would have to decide between storing automotive type tools in the garage, or using this to organize my fasteners in a way that can be easily taken to a project.
Either way, I think I would pair this with the rolling base to maximize utility.
rajunrosco
I am so unorganized. SOO unorganized!!
MattW.
So many small parts to organize! I think everyone has tons of miscellaneous hardware and not all in one place. In the end if its all in one place it will not be lost.
Eli
As a carpenter at a retirement community, I could mount this to the inside of my go kart, leaving more space on the inside for materials, so that I have to make fewer stops throughout the workday.
Michael Woods
Currently I have all my hand tools randomly cluttered on a work bench so this tool box would not only get them organized but clear space.
Mr Weedley
I plan on using to carry my socket sets. I got the Milwaukee socket inserts hopefully they will fit with minimum alterations. It would be great if they had the same handle that the 22in large tool box has.
Jesse M
I would use the racking to store the many packout parts boxes I have and make them more accessible. Right now they are all stacked on top of roll around boxes and I have to take them all off for parts in the lower ones. The racking would solve that issue for shop and truck storage.
I’d use the 3 drawer box as the lower portion of my packout stack. It would have the most common tools in it since I could quickly open a drawer without having to unstack anything.
Joseph H.
This Milwaukee 3-drawer packout tool box will help me organize all my drill and screw bits cases and small hand tools. I have small garage with small workbench and this will be great to mount the packout racking on the wall to save my workbench space! Also have the option to take this 3-drawer tool box out to job location will be a plus!
Rob
I would use this organizer to store my fasteners for projects. I currently have them in a divided toolbox but this would allow me to have MANY more fasteners with me.
James
I would use this for tool and parts storage in a new venture to repair smart phones and tablets. It would be much better than the tool bag I use now.
Ky
I would organize all my fasteners and hand tools that I don’t keep in my tote. And tidy up my garage with it.
Shannon
I would mount it to my mobile desk cart at work to hold the consumables I have to store elsewhere at the moment.
Gecko779
I would organize all my 3 printing supplies in one place
Cristobal Figueroa
I just got my first Packout box in a bundle with a tool for Christmas and it seems like a great storage solution. I think the drawers would be an awesome addition as my collection of Packout expands.
Nathan K
Don’t visit for a day and the site explodes. I currently don’t have any packouts, but this looks interesting to me. I would use to store bits or fasteners and would probably purchase some additional boxes to store my frequently used tools in a carry and go package.
Blythe
I would use these in my remodeling business. I love my ridgid boxes for exterior work, but drawers would be so awesome in close quarters interior work, since stacking and unstacking boxes is a major chore
john sewell
This wold be perfect way to access parts and tools without having to dig when using a top opening tool box. I would use it for organizing parts and small tools.
Perk
I am renovating my garage so I can make into an efficient workshop. The drawer and shelf unit will fit right in for use in workshop and ready to go when it is time to leave the shop.
Daniel L.
I’ve got a packout dolly on the way…
I would use the rack for the enclosed bed in my work truck, and the 3 drawer packout as a recovery/evacuation kit along with my two packout crates and my low profile organizer.
Vacuum hoses in one drawer, recovery hoses in another drawer, scale micron gauge and fittings in the third.
Thom
I like the fact that you can store the drawer on the wall. I have a small shop and floor space is scarce!
Brian H
I absolutely love all of my Packout gear! The 3-drawer box and racking kit would be awesome to further improve my organization and productivity.
Phil
My basement workshop utilizes floor stacking and my workbench top for storage, which is really less than ideal. With minimal storage options elsewhere in the house, these would be great in getting stuff off the floor and off of my workbench.
My productivity would certainly be improved if I wasn’t shifting equipment every time I needed benchtop space.
Matt L
I want to win the Milwaukee Packout drawers to use them organize all the HVAC fittings and tools in my mobile kit. They look very well thought out and I like the drawer dividers. The shelf racks would go great on the work van wall to keep the other packout boxes and tool cases that I have off the floor and accessible.
Eric H
I would replace the Keter portable drawer tool boxes I have with the Milwaukee system. I like the Keter and Craftsman system but it is no longer available. Also, Milwaukee’s Packout system has so many more options for carts, boxes, and customized aftermarket accessories to add later.
Brent
This would be deployed for all my 1/4 hex power bits and drills I have been trying to figure out a doos way of sorting them for easy access on site.
Mike
I roll with DeWalt in the tool dept, but I’m liking Milwaukee’s tool storage better. I would try this out on the job and see if it convinces to roll red.
AC
I will use it to store my electronics components.
Dominic L
New year cleaning! So I need to reorganize tools into a proper system, and not a haphazard mess.
Karlen
I would love to use this for my home shop! I love the packout series and how they can be mobile but fit right in with the shop too. The drawer unit specifically I would line with foam and put more delicate /expensive tools in
MFC
I would use it to carry around my tools on the job site. Drawers that actually work would allow me to keep the miscellaneous hand tools organized. And if they were deep enough, keep a couple m12 tools in it as well.
Thanks Stuart, hope the site is doing well.
Adam
While i do enjoy most of the Packout system, this will for sure help in the trunk of my truck. always swapping top box for bottom box to get something. I’ll put the drawers on the mounting plate, and whatever else on top.
No specific use for the wall rails, but I have some ideas. I think both of these items make the PackOut quite a bit more useful.
Robert
I would use this to organize my tools in my SUV I use to tow my race car to the track with. Drawers beat digging around in a bag for the tool or parts I need…
James Vis
I would use it to make access toy variety of fasteners easier
Casey
I would use this for small parts organization or possibly a 3d printing tool and parts box as I need one of those for the new printer.
K. U
I am into maintenance in a special need school .Would like this looker to wall mount in our IT room for easy access every day tools and parts
Justin Thorlton
I’d want to win this because it’s awesome.
I’d use it to sort my small parts and have it ready to go when needed!
Chris
These will be such a wonderful addition to the packout collection. One step closer to ultimate organization and look good while doing it. Also, a great way to show why Milwaukee packouts are the best for modular toolboxes. Now get to work 💪.
Greg
These would go a long way towards helping organize my work van!
KG
I bought into packout early on and have the large wheeled base box as it was their only mobile stack option at the time. Having that box fixed on their means certain things always have to go with you, even if they’re not necessarily needed so you have to pick what fits best in a large box vs what will you always need, plus it’s necessarily the least accessible box in the whole stack. Having drawers that open easily for the small to medium, often used stuff without taking the stack down would relegate that big base box to strictly the big stuff that’s infrequently used for me. Having the racking kit to pop things in/out of the stack vs storage is bonus.
Also, I acknowledge freely the new wheeled cart solves a lot of my minor complaints about the big box (and then some) but it is expensive for what’s now a marginal improvement for me.
Tristan
I’d use it for storing and organizing fasteners.
Luke Zane
Is that using the standard E trac rail for the Mount?? If so thats brilliant. Have been wanting to jump into a packout, but keep putting it off as in all life’s wants. So thanks for the offer .
Patrick Nguyen
I would use the crap out of these packout pieces! I’m currently living in a apartment with a full garage so I have limited space to put my tools but have found the Packout to be the best solution with it’s modularity, portability, and functionality. I’d put my most used tools into the drawers so I don’t have to dig through the packouts to get to them and the wall mounts will open up more space for storage!
Stacey Jones
I’d use it to store all the stuff that’s in cheap storage boxes in my workshop that are broken.
Nathan S
Like many others, I presently have a mass of fasteners and bits that are either scattered or in odd containers. With some outdoor building projects upcoming (kids’ playset add-on / shed build), this would really be helpful and likely speed things up quite a bit over the last time I tried to pull off any build like this!
Tina
I am an in-house Union Carpenter at a University and work out of my vehicle. This Pack Out Tool would really help me to organize my hardware and help me to get the job done right and more quickly.
Mikeee
It will help to organize my tools
Robert Ziemba
I’m an HVAC installer, and I’m making the transition from duct installation to unit service, so I have to carry a ton more small parts (copper ACR pipe fittings, electrical connectors, etc) rather than just nuts and washers. I’m so getting a new service truck, so this would be a great way to start in an organized fashion, rather than have a ton of small cardboard boxes bouncing around in a tool tote. The rack could bolt directly to the cab/cargo divider as well.
Jaycob P.
Right now my fasteners and tools are scattered amongst a bunch of different toolboxes and carts. I’ve been slowly organizing everything and this would be great to help get that done while allowing me to move stuff between my two garages.
IJK
Currently using Dewalt Toughsystem. Been eyeing the packout for awhile. I like the opportunity to directly compare it before committing the money needed.
Toolie
I would use it to better organize the bits I’m always losing in my larger packout containers. Looks perfect for a setup where I want both to have easy access in the shop, but also be able to take with me in a snap!
Neil RTX
All of my tools are stuffed into my VW hatchback and this packout setup would make my life a lot more convenient on the job site when I need to grab another battery or fasteners.
Jim Felt
Using three incompatible stacking systems already I honestly can’t see any logical use for this drawer’ed Red addition. Or at this point any other color either.
But what a great giveaway for those who might want to try this newbie.
And maybe explain what they like about it once they get it loaded up and in actual use.
AKA thanks once again Stuart.
Jim
I would use this to organize smaller hand tools for service calls, , and having the racking solution will keep it off the floor or benchtop.
Matt Williamson
This looks great!
I’m just looking into getting a packout system for organizing my tools and this would be a great start.
Caleb Williamson
I’m a senior in high school; this would be great for me to take some of my tools with me to college next year!
Dan
I’d love to add this as an organizer instead of the peanut butter jars a person has been using over the years. Wanting isn’t the same as needing, and if one pulled the winning ticket, I’d pass it along as a gift to a neighbor who has helped me with
fixing machinery, when I struggled as a DYI.
AngryDrumGuy
I’m invested in the Ridgid system, but recognize their shortcomings and Packout is a little cost-prohibitive for me, so this would be a great way to get into the platform and use a feature not offered by my current system.
Derric
Don’t know exactly how I would use it but I don’t have any packouts and this would be a way to start collecting them.
John
Organize the old garage workbench to find my tools easier.
Larry
Thank you for the chance. I would use them to help organize my shop/tools. i have to much stuff out and just lying around, im out of storage/tool boxes.
Scott F
I would use this to store all (some) of my tools in the RV I am renovating for hopeful full time use. Would be an EXCELLENT replacement for my snap on chest that weighs almost 150lbs (and as such, does not move around). Not going to be able to bring that with me, but this…..
And it would go with my Milwaukee everything else!
Frank
I would put it right next to my other tool boxes and use it to store things like screws and hardware. It would also match my other tool boxes.
Daniel Lawson
I am currently using the Rigid version but I am looking to start in the packout and these would fit the bill and help keep cost down to get in it. I use it for general diy and woodworking.
Chris
I’d want to win because it would look awesome on my packet bundle lol. But seriously I’d use it with a 2 drawer to organize some mechanics tools for away from home use
Justin
I’d use it in my Jeep to carry necessary goods for off-roading trips.
bigiron
Perfect wall mount. Could see this as a nice fit for my small screwdrivers and delicate tools. Probably a good place for my x-acto knives and needlenose pliers and diagonal cutters. Nice set of tray compartments for all the screw types that are still in packages or plastic jars.
Diego Diaz
I’ve been waiting for these for so long! I need one to replace my middle box in my work van so I don’t have to remove the top boxes every time I need a certain plumbing fitting. I also keep my k-60 right next to my half size packout box because it fits just right. If I could avoid touching that when I’m doing clean plumbing I’d be ecstatic.
The wall mount I’d keep at home, next to my garage toolbox. I’d just need to buy a couple more packouts to fill them, haha.
Michael M
I would use the Milwaukee Packout to organize screws, bolts, and other fasteners I use. It is a very neat design!
Chad Rogers
I am a fan of Milwaukee’s packout system and I like the idea of drawers for quick access to tools without needing to unstack boxes for lid access. I will be utilizing these for hand tools and I love the idea they can provide storage for both stationary sites like my shop as well as being mobile for the job site.
Adam S Cosper
My only complaint about the current Packout system is needing to take apart my stack to get to tools stored in the lower compartments. This is a wonderful solution to that problem. I’d simply replace my medium Packout toolbox with this beauty.
John Zahner
It’s the perfect way to store my m12s in the work shop while keeping it portable. Milwaukee is keeping the bar raised well above the Dewalt Toughsystem 2.0.
Aaron Harmon
I just got into packout in a big way. Love it. It’s helped me keep my work space organized and it makes me much more efficient in that I can carry everything into the area I am working so it is right at hand when I need it. There is much less running back and forth.
Chris Gutierrez
Winning here would be a good consolation for not winning the 750+ million lottery this week.
But also I find that I bring my cordless tools with away from the garage more than hand tools, but they always get dumped in a bag or I’m moving them back and forth from cases. Drawers solve that problem. Tools can be stored in travel cases that also don’t slow down access in the garage!
X lu
Would love to understand the fascination with packout. They are so space inefficient as to be functionally inferior to every alternative from low to high price. Just don’t understand.
Barry Albert
Would use the drawers to expand on my growing packout collection. And let me experiment with a wall racking organization system.
RICHARD DEAN
I just got my first milwaukee tool, M12 Fuel Ratchet 3/8. I could really use a nice pack out to store it well as other pieces. I have an 1980 Trans Am and could throw the pack out in the trunk so I can drive it farther and not worry.
David Settlemoir
I need the Milwaukee Packout Drawers to organize A/V Converters for Video Production on the Go!
DXE
I would use the pack out drawer /shelf combo as a way for my workbench tools to easily become my on the road tools. Keeps my organization seamless between my van and my shop. Having the right tools for the right job all stored in the same box and easily accessible in drawers will be life-changing.
Brent
This is an awesome system for small parts organization. I can see it now on wall with various fasteners and another with electrical connectors / supplies.
Frank Devine
I’m a self employed carpenter and use the back of my suburban for my tool storage. Right now I have my Packouts organed and accessible from different doors and have been waiting for this drawer unit to arrive, so I it can make tool organization that much better. I would use this to organize and store the hand tools I feel are essential to have with me all the time but not always needed to be carted in on every job. Im sure there are a variety of other ideas a person could come up with once they get their hands on it!
denis
I don’t have any decent storage solution, I have multiple bins and boxes of all possible shapes and sizes that inefficiently are taking over my garage.
seanie
upgrade the emergency repair kit
Scott N.
I would use this to finally start to organize some of my hand tools, such as pliers and wrenches!
blocky
This would house the general and mechanics tools I currently keep in ancient, cracked plano boxes sliding around the back of my van. I’ve already got E-track running down both walls, and as a bonus, this would transfer easily to my packout rolling box for location work when I need it. I’d toss that 15″ tote right on top.
John M
I have everything Milwaukee, from transfer pumps to radios, as well as all hand tools to the Hole Hawg. These drawers would help me organize my truck and tools. Every Milwaukee tool I get is so exciting no matter M12, M18, or Packout.
MMY
I’d use it to store all my M12 tools.
Iroose
I would use these in the back of my truck to organize fasteners and connectors, which are currently in the cardboard boxes they come in.
Jonathan Kutz
I would use it to store my welding tips and fixtures.
Christian F
I would use it to organize all the coffee tins of bolts/hardware I have scattered throughout my garage.
Dougem
I would use the drawers for hand tools.
Jerry King
Reorganizing the workshop during the pandemic. Have a couple pack out boxes for screws, looking for a way to make them more convenient to use, this would be a perfect solution.
Garrett
Definitely lacking in storage for my garage. I haven’t yet standardized on a system, and would love to give this a try!
RockyDog
The drawers are finally the answer to my hard to access stacked Ridged boxes. No more stacking and then unstacking every time I need a tool. Even if I don’t win, I think these might be in my future.
Bill
I would use it to organize hand tools for disaster relief work.
Melvin
Would use it to organize screws.
Jason
I would use it to organize parts, to keep me from disassembling my stack of packout every time I needed something.
Andy
This setup would be the best way to keep all my hand tools organized and accessible for all the automotive repair/modification projects. Plus, I can add some additional packout cases to keep my M18 and M12 tools in!
Ross Jones
Have a service truck for conveyor. You can never have enough storage
Adam Cotton
I’d use it in my work truck servicing oil rigs.
Addison
My uncle has longed for one of these. I would either give it to him, or flaunt it. Haven’t decided yet 🙂
Matt Corkern
Would definitely love to have this. Will have a new shed too and my wife will be so glad for me to pull all my small hand tools out of the kitchen drawers and put them in a couple of these 🙂
Pedro Morales
Organize, organize, organize! I’ve been consolidating down all of the random toll boxes, bags, bins, etc. and I want to get to a single usable system. Drawers would be a nice addition to my growing Packout collection! Appreciate the drawing and good luck everyone!
Brian M
Awesome giveaway. I’d use this for both work and home storage. The drawers would be great for working without having to juggle smaller boxes and digging.
andy
I have sooooo much stuff rolling around in my truck and I’m to broke to buy something useful
John Blair
I would set it next to my Dewalt ToughSystem and use it to show him/her/them/it why I switched over to Packout. Hopefully it would make the drawers on that piece of junk work just out of shame.
David
Could see using it to organize connectors, adapters, plugs and whatnot for my convention a/v company. There’s always a ton of connectors for audio and video plugs. Right now all mine are in decade old Rubbermade and Stanley boxes that are starting to fall apart.
Also might be nice for the back of my truck, throw a short mechanics tool set in there. The locking bar would be good for that.
Stephen Nicholson
My 5 year old got his first tools and a bunch of hardware for Xmas this year from “Santa”. This would be great to keep all of his stuff together in one place, and the sturdy construction of the packout will be able to stand up to the rough and tumble that it will no doubt experience in use.
Dennis
I would use it to organize my rotary tool and accessories.
alex bedenis
I would use the packout drawers to further lie to myself that i will become more organized. I love my milwaukee tools and want ALL OF THEM!!
Paul D
This would be ideal for me. Whenever I make house calls I have to bring in 2 to 3 cases. They stack, but it means multiple trips in and out before I’m ready to work. This would save a lot of time and effort.
Thank you for the opportunity!
Hubert Osborn
In my small shop I do not have much floor space. Wall space, I have a small amount. This would work great.
JaJustSr
Im a finish carpenter, and use a lot of smaller tools that I want to keep organized— on location and in my sprinter van. Thank you for your consideration lol.
Kevin
Trying to get more organized.
HandyDan
I already use a Packout organizer to help me keep some ofmy Raspberry Pi stuff organized, one of these would help me keep the rest organized in one spot.
Bobby
This would be great for all my woodworking screws.
Chris V
I have begun buying into the packout system for our garage, however right now it’s limited to one toolbox. This organizer would allow me to eliminate some small bins we use and the racking would allow the boxes to come off the floor and onto the wall.
Andrew
I would continue my packout wall on my newly built garage.
Yoni
I would use these to setup my van for the oddjobs work I am trying to make my full time job. I already have a ridiculous amount of packout, so these are a logical next step.
GarlicBanana
Would help organize and provide more storage in the garage/shop as my wife wants to be able park the vehicle in there again. Eek! 🙂
Jacob
I recently moved and because my tools lacked any kind of true storage, got packed away in various boxes. So while I knew I had one, I always had trouble finding it. This would allow me to start organizing my garage.
Finstock
I’ve been shifting over to Milwaukee tools and storage as I restructure my garage. I would place these on the new wall and have them gaze down condescendingly on my remaining Bosch gear.
Barnett Alfant
I have twin toddlers that just learned to get past the safety lock on the door opening into the garage. I just started a woodworking hobby, but I’m always worried about leaving small parts out they could get their hands on. We’re also in a new home, which is far from organize, especially the garage. The box itself is great and would help keep parts organized and locked away from the babies, but the ability to mount it on the wall would keep it further out of their reach for peace of mind. It would also be easier to just grab it off the wall when working, rather than stacked in with a bunch of boxes.
Kphee92
I have so many boxes of fasteners that need a placr to be stored snd organized. The Milwaukee packout boxes and racks coulf perform that function.
Lon Schreur
Would use this to organize motorcycle wiring supplies and fasteners. Milwaukeakes great stuff.
Caleb Allen
I would love to switch to these pack out boxes and drawers vs the DeWalt tough system I currently use. they look so much more useful!!
Mac
Would allow assembling the needed packout configuration in the van rather than taking apart the stack to find the needed pieces. I have a wall space left over in my van for exactly these mounts and drawers. It needs to be filled in, but I kinda spent a lot this season already. Someone kept writing about good holiday specials… It’s almost my birthday. Presents can be a little late though – nudge, nudge, wink, wink
Steven
I would use the drawers to organize all the accessories (drill bits, blades) for my M18 and M12 power tools. The wall mount rack would be perfect for storing my packout tool boxes that are filled with specific task tools like plumbing, electrical, and picture hanging.
David A.
I would use the 3-drawer unit to further organize my loose parts and fasteners and the wall racks would go in my home workshop to house a few packout organizers I already have. Thanks Stuart for the work you do and the opportunity for a fantastic prize!
Djmikediaz
I need these to get organized
John Robbins
I would use the drawers to store my sockets. I don’t have a lot of space, so being able to store them on the wall AND be able to connect them to my pack out system to go wherever I needed them would be amazing!
David A.
Just getting started with Team Red for my RV. Fuel impact driver and 3/8 drive wrench, the Packet giveaway would get me started on storage
Geekcatholic
I move frequently, so this would be a nice alternative to those metal drawer carts.
James R.
I’d use it to store my off-road gear and keep it organized before I go on trips.
Bill K
Over the past 18 months I’ve been doing a total shop consolidation and sorting of everything including fasteners, electrical, electronic, jewelry making, metal working, work working and more. My organization containers are a hodge-podge of all different types, all with advantages and disadvantages. Going with the Milwaukee pack out system looks like a universal system that would be a better way to go. Would love to give it a try!
Paul Dajewski
I’d use the boxes to help organize my garage. Lately I have purchased way too many tools (for the sake of my wallet, please stop posting about deals) and I’ve run out of places to put them all.
Dan Zondag
The Packout drawers would be used to reassure me that I have not lost my memory each time I look for the fasteners I just bought, but cannot recall where I put them.
Adam B
My current storage is just shelves because I’m not experienced with installing drawers so this would be a nice way to keep my Milwaukee stuff clean and free of saw dust! Plus I’m short on space so smart storage solutions would be perfect!
Mark Daniels
Honestly this is perfect for my miniature model hobby, I would probably just put that drawer on the wall to put spare pieces, paints, hobby tools, paperwork in a handy place.
Abner Diaz
Since i already preordered one of each of the drawer boxes to store most of my general use hand tools (hammers, pry bars, screwdrivers, pliers, ect) i would probably use this one to make a custom mechanics set, either organizing it by ratchet size (1/4, 3/8, & 1/2), or i could organize it by tool type similar to what im going to do with my hand tools. Anyway, i think that is what i would definately do if i got another one
Bryan Cramer
I work for a service company and this will be very handy for small parts and components in the truck and will probably lead to more packout purchases. 😄
Matt Miller
This would be very useful in my tool storage and organization. It would help me mobilize quicker when I am going to help someone at their house. I typically am loading up my tools into buckets and packing them into the trunk of my car. THANK YOU for the opportunity to win this Milwaukee Packout!!!
Michael W
This would help with storage and organization when running tools up/down stairs to parking area where vehicles are, and secure travel if going to a friends garage.
Zosim Kaya
I’d like to win to crack down on my poor organization of drill bits, screws and other heaps of important miscellaneous tools.
Mike Welch
This would be helpful in getting small fiddley stuff under control
Brian Brown
I’d be using at work, to organize cordless tools that get used in multiple locations so they stay together and have a place to be put away.
Addicted2Red
I would finally organize my 3D printing area.
Currently my workbench is stacked with random boxes, harbor freight cases and spools of filament.
Ramon O Vizcarra
I drive a 2007 tacoma, the bed is covered and I use a bedslide. Packout has been a great solution to build a great mobile storage solution. Drawers would be a fantastic alternative to the current setup I’m using now.
Plain and simple, efficiency and organization.
Thank you.
BradWH
As a Battlebots builder I would of course be using these to build and repair some of the most brutal bots in very demanding situations. Being able to bring drawers with me such that I don’t have to remove upper packouts to reach the contents is really exciting. I have been waiting for Milwaukee to introduce drawers to convert over! I’ve been looking at getting more and more pack out and tools for the next season!
Alexander Neal
I would use the packout to help organize my hand tools and some of my smaller sundries. I’ve always wanted Milwaukee to introduce a packout with drawers! I would definitely use this daily!
Andy Spanker
I would put it on my bicycle since I dont have a car and tired of caring all my tools in a backpack.
Bruce Pierce
Running out of space for all my Milwaukee tools.
Devlinjones
I would use the drawers to store my Milwaukee fuel ratchets, impact wrenches and socket sets with the dolly so I can have a rolling tool chest for motorcycle and automotive work around my small shop.
Chuck Reynolds
As this would be my first containerization equipment I need to better organize fasteners and woodworking screws and nails and probably wirenuts and electrical tools I have. Been looking to get into pack out as I already am on the M18 & M12 battery platforms. And I like the red.
Rodney
I’d use the top two drawers to store my chisels, measuring/marking gauges and smaller handtools. The bottom drawer I would bed with hay and straw and keep free to rehabilitate injured wildlife. The first patient would be renamed ‘Milwaukee’.
Seth Goodson
I would use these drawers to better be able to organize my hand tools. Have them in a large Packout and this would allow me to access hand tool quickly, instead of having to dig in a box.
garrett
I’d love to be able to hang this on my garage wall in my new house to help with storage of my growing set of tools. Specifically, this looks like a great place to store my M18 batteries and accessories.
Josiah Williamson
This would work great for keeping my my lathe and pen turning supplies organized!
Geoff A
I am trying to move out of my garage into a workshop. Years of parts buckets need to be organized and the Milwaukee storage solutions are on the top of my list. I bought the rolling kit last year and I am excited to finally being able to find what I am looking for the first time.
Rob Spanos
Would use to keep an parts from continually getting lost!
JMG
Currently, I am heavily invested in Toughsystem boxes. I would use something like this to determine if it is feasible to shift to the Packout system…
Rob Ifflander
This would be my first Packout and I can’t wait to set it up in the shop!
Joe
If I had the packout drawers I guess I would then be buying a packout dolly to replace my packout rolling box as the bottom of my “stackout” because this would be SO much easier than removing the top four pieces just to grab that one damn tool that’s always at the bottom.
…then I’d have another stack to build onto.
John
I already use Packout to organize my work truck. I want to add the drawer system to my current setup.
Mike
I would definitely use this at work. I do hardwood floors. The packout system is the best, I’d love to expand on my current setup with this one.
Eric Starzinger
I am in the process of buying a new house and this would be a great start on the workshop I am going to be building!
Tator
I do not need this! Wink wink, I already have 2500$ worth of Packout in a Ford transit already!!!
Leon Richards
These would go right in my trailer I just finally got set up for work as a finish carpenter! Would compliment my other packout pieces and solve a few space and organization issues with some hand tools and nail gun ammo.
Brandon S.
I have found countless uses for the various Packout boxes that range from customizing “grab-and-go” project tool kits (essentially all the tools and accessories required for a specific task) to my single trip truck to campsite gear set (yes, I have a dedicated stack for camping gear)! These drawers simply open up more possibilities for customizing how and what gear I can carry and gives much needed access to the bottom of the stack for big projects. I plan on using one as a camp kitchen organizer in combination with the work surface (swap out the plywood with HDPE cutting board) and one as a Kreg pocket hole workstation, again in combination with the work surface. But I’m certain that I’ll find more uses and have to get a handful of these… don’t tell my wife!
Rick Rouse
The packout drawer and rack system would be perfect to use in my enclosed trailer to mount to the wall of the trailer to keep small parts and tools off the floor. The trailer is used for pressure washing , house washing and roof washing. Sodium hypochlorite (chlorine) that inevitably gets leaked or spilled, killed my Husky storage system by making the plastic tabs brittle and they snapped off. I need a storage system that keeps everything such as replacement couplers for my hoses, downstream injectors, tools and plumbing parts organized and clean.
Ken F
Just switched over to Packout from Rigid’s system. It’s a massive improvement in what was an already robust system (note they are manufactured by the same copmany).
The Packout system is a winner.
I would want to win these as drawers as they much needed to further drive the convience factor so I don’t have 3-4 boxes lying on the floor open. These will drawer will surely save time on a job and keep organized.
As convenient yet robust as the packet locking system anyone who has started accumulating these can attest that after 3-4 deep stack the lower ones become a pain to get to. Looks like the shelves break up a big stack in van or shop.
Ken C.
Ready to get rid of the butter tubs on my table.
Mac
Tractor emergency kit. Like to get all the tools and parts organized and consolidated in a box. Drawers look ideal so I’m not digging under stuff for things. Wall mount is ideal for storage so it’s not wasting bench space and has an official it’s always supposed to be here spot.
Meredith Clark
Wow I would immediately use this to organize my spare-bedroom apartment workshop. Sharpening supplies, small marking and measurement tools, and all of the other small things I use daily that my cat also tries to eat daily.
res51cue
Thanks for the opportunity! I’ve picked up a lot of various hand tools/ sockets over the past few months (thank to you!) and don’t have a storage solution for them yet. These drawers would definitely help with access and organization!
Tom E
I would use the Milwaukee Packout in my soon-to-be overhauled garage. I bought my first house in early 2020 and spent the majority of the year acquiring tools and small projects. As of right now, my tools are just sitting on top of boxes in my garage. My plan was to design and build a toolbench in the Winter of 20’/21′. Unfortunately, I had a run-in with testicular cancer and have been sidelined all winter. This week I got the news of a clean bill of health, but I still need to take it easy for another month. I will hopefully be able to start building my tool bench/storage in the spring. This Milwaukee Packout would be ideal for my storage needs. Many of the tools/accessories I have acquired have been Milwaukee brand, and love the quality of each product they make!
David Parkhurst
To be honest I just got out of prison for child support I had quit paying it because I have crohns disease and got addicted to the pain medication and I’m starting all over and I started working a construction job and some friends have gave me some of their old tools and accessories and it would be awesome to have something like this to put my hand tools in so thank you guys for having a giveaway like this it’s surly going to make someone very happy
Matt
I would love the drawers cause I hate having to remove the packout boxes on top of others to be able to get into the bottom ones.
Mike
This would come in handy with my garage refurb and reorganization. Go along with my other Milwaukee tools.
Carol Ezovski
I would like to win this for my husband. I would see that he used it to organize the garage and not have everything scattered all over the entire garage like it is now!
Nathan
Id make sense of a million different fasteners just getting lost in various jars
keith griffith
Avid m12 and getting into m18 line. Have m12 drill and drivers at home tool area and at art studio. Though the m18 finish nailer I’d my current favorite – just an amazing tool.
I would love to win the pack out 3 drawer and wall rack to add much needed organization to my home tool and hardware area. Would happily post to Instagram using your hashtag and Milwaukee’s hashtag. Anything to promote and give major props!
Thanks for the chance to win and cheers to you and yours!
Derek
I would use this in my work van to finally get some organization for my small parts . As a small business not a lot of disposable income. To purchase these items.
Todd shaffer
Who doesn’t need a little more organization. Something most shops could use
Jakespfx
I would use them to organize my layout tools that currently are just floating around in my big packout box.
Chris R
I would add this to my garage shop and fossil prep station. Seems really well constructed and easy to access. Great updates,
Grant
This would be great for organizing the tools in my truck!
Travis Dillon
I would love to use this for my Christmas light display. Laugh all you want fellas! But each year it gets bigger and bigger. The spare bulbs and fuses, zip ties and plugs. They need a nice organized home! And then it might make buying into the pack out system that much more appealing down the road!
John E.
I’d use this in my shop and on the road when I rent box trucks with E-track to keep my traveling tools protected and at the ready, while making the transition from shop to truck seamless.
Ivan
This would go perfect in my work vehicle. Been searching for something exactly like this. Would hold small hand tools and small parts I use working on golf carts. Fingers crossed
Jared
I’d love to put things in it! For real 🙂
clayton keeney
I’ve been kicking around the idea of mounting some Packout stuff in my work shell on my truck, this would be the first.
David
This will allow me to properly organize my go to tools in my work vehicle helping me to be more efficient on the job site
Chris B
Wanting to purchase to get into te packout system and do some organization. Getting one in the giveaway would be even better!
AD0321
The drawers would be excellent for organizing fasteners. It would be great to not have to remove multiple organizers stacked on top of each other to get to various fasteners. The rack would be nice to have stuff off the floor in my shop.
Emptys
I need to spend some time to clean up the garage countertops, i’ve got too much junk just lying around there, and adding another toolchest would just take up valuable countertop space, these seem like a great remedy
Damientorres
I would much appreciate this opportunity to help keep my tools organized and neat. Milwaukee is my go to for all tools and organizations purposes. Tbey always set the bar on tools and storage. This set would be used daily to help get the job done with the right tools.
M. Schmidt
I would use this to organize all the screws, bolts, nuts, wire nuts, staples, etc. I have currently sorted loosely in old lunchmeat containers
MV
I would use it for organizing tools in the garage.
Pastor Dan
I would use these drawered Packout tool boxes to organize, transport, and protect many of the hand tools, instruments, and small parts that are inefficiently consuming valuable volume in my current Packout boxes and in a few tool bags that are about to burst at the seams (figuratively speaking, of course).
Fernando Servin
I am a DeWalt Fan and this would be my start to the Milwaukee storage world and also I want to do a full Spanish review of it for my YouTube channel 🚀🚀🚀🚀
Todd F.
My plan has been to get the drawers to organize my specialized bike tools. They have been living in bags instead of drawers for years, lugging them around to fix others bikes. I’m planning on mounting my truing stand to a Milwaukee worksurface. That way everything has a place for my work flow at home AND when I’m working on a bike in someone else’s garage.
Brian
I am the go-to handyman for all my neighbors, whenever something needs fixing I get asked. So I have been slowly building up my tools to handle whatever may come. By using the Packout system I can be more organized and help more people with their repairs and such.
JoWo
I’m a remodeling and finish carpenter. My finish carpentry tools are in systainers, and my remodel/rough work tools are in TSTAK boxes. I have been beginning to switch out the Tstak/Versastack boxes in favor of the Pack out system.- a little more durable, and quick to click together. I initially wasn’t interested in pack out because I use a number of the TSTAK drawers for hand tools and parts. I am really looking forward to replacing those drawers with new red ones!
James S
I would use it for hand tool organization. Drawers work so much better for that than bins and top down totes.
Jim Holmes
I would mount this right above my saws so I can have easy access to find the tools and bits I spend so much time searching for.
PTBRULES
I want to reorganize my sockets. Organizing sockets is a nightmare without consistency. Three drawers = three sizes of sockets 🙂
ErrMrr
Until I move and can finally have a garage again (fingers crossed, should be soon) I need every inch of efficient organization I can get.
Aaron Massey
To organize all my Milwaukee accessories!
Tim
I like to keep my tools organized for quick access. There are 4 linen closets in the hallway that runs almost the entire length of our house and I use two of them for my tools. This kit would combine perfectly with my already existing setup, especially for some of the hand tools that don’t have a nice and neat place.
mshell56118
I would put this to use and give it a tough test. I am a field technician so this would be put on my work truck where it would be bounced and tossed around. As to what I store in it that is still to be determined but if it comes with enough dividers it would more than likely be electrical terminals
mshell56118
I would use to store electrical terminals in my work truck
Adam
I have a lot of Milwaukee tools and have often wanted to buy their packout stuff but have resisted because I know it is a gateway drug and I’ll buy more and more. Currently all my tools are in my garage cabinets and I do a lot of work on my house, my parents’ house, and my siblings’ houses. And everything is loosely in the cabinet and I have to sort through it all every time. This will help me be more organized.
James G.
Making the switch from Project manager back into the field as a site superintendent, also making the switch from Dewalt tough system to Milwaulkee Packout. Both are better for me!
docjavadude
This would be a fantastic home for many of my tool accessories, fasteners, and small hand tools. My workshop space is limited, so the stacking drawers would be perfect. I can’t wait to see the new 3-drawer packout unit.
Allan
Currently rebuilding my house with sweat equity. These would be great to help keep me organized with all the miscellaneous pieces it takes to put a house together. I could keep track of my smaller pex fittings, fasteners/screws, wire nuts and the like. Hey, even if I don’t win, I just might have to buy a set or two. Thank you!
Paula Brown
My husband has to spend a lot of time away from home b/c of his job in the military. This would be perfect for me to use for the tools I may need for quick fixes,
Alex
I’m the guy that tries to organize my tools by occasion. A tool bag for this type of job, another one for that. Just pick up and go right? Wrong. The second a tool has more than one use… boom.. the success of my organizational plan is obliterated. The struggle is real. I need a tool box SYSTEM that will save me from that hour and a half spent looking for stuff. “As long as I have it with me somewhere I’ll be good” can only get a person so far!
Greg
I want this to put all my layout and measuring tools for quick access
Gady Weiner
I’m in the process of moving my woodworking workshop and having a storage solution that will help me move AND organize tools at the same time is perfect!
danhorst
I think the real question is what _wouldn’t_ I use this for. I’m planning on getting a few of these to serve as both a mobile workshop and range box for high power rocketry.
Devon Womack
I would use it to organize my hand tools, I have a packet rolling box but it gets very cluttered!
Larry
Now that I am retired I am busy working for family. My shed is small so I use the Milwaukee Packout to transport the tools I use. I have to pack and unpack for each job. I would use this to store my tools and that would eliminate pack and unpack. In the shop they would hang on the wall.
Doug N
These drawers were made for pairing with the dolly for pushing around in an auto repair shop. Top it with a large case for use of the handle and it will be perfect. I just hope there is some type of detent or latch besides the locking bar.
Justin Cooper
These would be perfect for keeping my squares and smaller hand tools in. They always find their way to the bottom of my packouts.
Rob
My toolbox is overflowing with accessories and this would help me to organize everything.
Neil
I’d use the drawer system to organize and consolidate all (at least some) of the small parts strewn about my garage.
I never know the full recycling rules in my town (my wife may know, but she never tells me), so my garage is much more cluttered than when I set up my shelves and work spaces, so this would probably be a big help, keeping me from buying things I need but already have. The duplicates waste money and make the clutter issue that much worse.
Matthew Shutta
I’d love to have this so I could have a place to store tools in my small garage so I could free up some floor space
Andrew
I’ve been looking into portable storage solutions for a while. As much as I’ve liked the packout system, I haven’t been able to bite the bullet on just having top opening bins. These drawers will go much better with needing to move around between remodels. Being able to get to things without needing to dig around is a huge advantage.
Erin
Love our Milwaukee packout! What a great addition this would be to organize our small items.
Sean
I would replace my large box with the drawer unit for better access to different tools….digging through the bigger boxes is frustrating.
Anderson Nettleship
I travel for a living and work out of a suv or van, Milwaukee Packout Drawers would allow me to better organize parts and tools which would also save me time and money. The wall shelving rack would be put to use in my shop saving valuable workspace.
Audio Savant
I’ve been waiting for the drawer models to come available so that I can start replacing a different brand I’ve been using for a while and get more organized. Excited for all the options coming too.
Kimber Janney
Seems like a great system for both van and shop!
Gavin Wellman
I would use this to compliment my current pack out set up and to provide additional organized storage in my shop. I’m a recent recipient of a pack out set up, and the newfound mobility while still being relatively organized has improved my work efficiency.
Greg Lawrence
I work facilities/grounds at a small community college so I do a lot of different things plumbing electrical equipment maintenance etc the packout system has been great being able to take the things I need daily and leave the tools/parts not needed the new drawers are just another great option within the packout system
Aaron I
I’ve been going through the hell that is organizing my shop, this would help with that and make it easy to take the basic tools to give without hunting them all down every time.
goddardpool
I seriously need some packout drawers for my “trim” set up, I would load it with the tools I need such as nailers, hand tools, etc.
Francis Mahlie
I do a lot of finish work and I would use the three-drawer pack out for containing all of my finish tools that are smaller and all the screws and nails and such things. I move my heck out system from my car to the garage often and it would be nice to be able to hang many of them on the wall instead of having them stacked in a corner.
Eric S
I have a lot of tools but no Milwaukee products yet. This tool organizer is sleek and I really like the wall mount. Looks like a great way to organize all my drill and driver bits and mount next to my charging station.
Giovanni Manilio
I would use one drawer for screws, another for electrical wire nuts/staples, and the other drawer for misc small parts.
Matt
I’d definitely use this in my jeep to sort and store consumables for road trips and camping trips. With little kiddos, there’s always a need for snacks. Simple stuff like honey packets, cookies or granola bars end up all over the place without a way of keeping them at organized!
Maria C.
My husband thinks I’m entering this for him but if I get it, it’s all mine baby!! I hate the cookie cutter storage options available for crafting so I looking into alternatives and found the Packout line. It’s perfect for what I need because there are so many options to make it my own to suit specific needs and it’s portable. This kit would be the perfect starting point.
MI Dad
Ooh the rack / shelves would go in our cluttered main server room so we can snap our packouts of tools and parts in the wall and just grab what we need. That big boy with the drawers hooo. Endless uses. Tools. Parts. Hopes. Dreams. 😬
kuz jr
I am a Milwaukee fan/advocate, just starting my Packout collection. These pieces would make an awesome addition. Thanks for all the useful info Stu!
Boris
Definitely perfect to organize my fishing tackle. Crimps, swivels, shackles, hooks. Having it off the work bench is extra credit. Now that I visualized it the final outcome, I might as well buy one 🙂
Eric F
I’m a carpenter and currently use a pickup with a cap and custom drawer boxes in the bed to organize my tools and supplies. I recently started using a packout rolling tool box to help get my tools on/off the job site. The problem is accessing the bottom/middle box for tools is problematic. I’d love to get some packout drawers to help better organize my gear.
John S
I’d love to use this to organize my large hand tools. I have them in the big Packout box, but things get buried. With that box free, I’d have a better place for my knockout kit, M12 wire cutters, and torque tools.
Eric
This would be great for keeping smaller tools in and organized when I’m working in other theaters and shops.
Kevin
I would use it for my solder kit and other hand tools, thanks
Evvy Toolbox
I would use this to organize hand tools when I bring the pack out to work on steam boilers.
Mikehanco6
I would love to keep my shop more organized. It’ll keep our toddler safe and my wife sane when they’re out there!
Eric
I could really use these to store all my sockets and wrenches. My place is small, so large metal tool storage isn’t practical. And, the competitor’s plastic drawers out there are generally too weak. Been waiting ages for something like this!
Cesar M
This would be a great addition to my civic build. Organizing nuts and bolts! Good luck everyone.
Lyle Nevin
I’d use it to keep my random hand tools organized in my van.
Gregg
This would be perfect organizing items for our neighborhood first responders
Collin_bam
I’m an a 1st year apprentice in the HVACR field who does service calls all day. With these tools, I will be able to make my day more efficient. I will be able to store stuff more effectively so I know where it is at. I will also clear space in my van to store more parts that way I always have what i need when I need it! Time is money in our industry. The quicker I find my parts and finish the job, the quicker I can get onto the next job and gain even more experience. Not only will these products help me be more organized, they will also indirectly help me gain more experience because I am able to complete jobs quicker because I am able to find parts quicker. I am a huge Milwaukee fan already and have based all my new purchases on prior Milwaukee experiences. Great products and can’t wait to see what is next in the board of new releases!
Michelle W
I would put this inside my closet where I keep my special tools and things away from my children. I have a lot of doodads and supplies for my hobbies which are currently in a couple different places and not very well organized. I really like the accessibility this offers!
alex bedenis
I would use tell my wife that its my new dresser. I would fill the house with red drawers. Milwaukee everything!!! #ilovemilwaukeetools
Tony Harris
I’d the Milwaukee pack out drawers with my new pack out rolling bin for a sweet hvac install kit 🔧🤙🏼🔥❄️
Tony Harris
Also I’d use the racks in my truck for easy storage and removal of future packout containers !
Jeremy
I would use it to start out my Packout collection and for all my miscellaneous items
Jay
Just getting into woodworking and I’d use the system to better organize and transport tools as I move outdoors for a lot of my work to keep the dust down.
John
I would use the Packout drawers to replace a couple of Tstak drawer units used to organize my stash of electrical parts like extra devices, conduit fittings, wire connectors, screws, and so.
Alex
I’ve been trying to narrow down which modular system I want to go with and this would be a great start to Packout. I’d use it to store my pocket hole jig and accessories and various other woodworking items/screws/etc.
Dmitry R
Need a place to store my on the go tools for easy deployment to a job site.
Brad
I would love to have this and organize all the tools I need to take down the fingers of our service float along with the hand cart. The pack out systems will fit down through the hatches for the engine rooms and jet rooms on the ferry boats.
chaserp1
These would be great to organize my supplies as I finish my post frame home this spring!
Devin McJimsey
Definitely need one to organize all the different screws and anchors I keep on the work truck
Kwon
I need this to consolidate my automotive fasteners, gaskets, and o-rings. I’ve had a lot of metric hardware creep for the past year and finally have enough that organizing by size makes sense so I can recycle all the oddball ones of packages.
Kat_Poops
These Milwaukee boxes are great. I haven’t added a set quite yet. Maybe someday.
Jeff H
Would be great to organize my small woodworking tools in the garage.
S C
Ive been meaning to switch over to a pack out for a while. This would be great to store all my bits and small tools that always get lost in the bottom of my tool bag.
AC
Could totally use this in the boat barn! Need something I can mount off the ground to hold some tools and bits and pieces of gear.
Elias Jiménez
This would help me on my on going journey of becoming the best finish carpenter I can be ,not to mention a great addition to my packout
Rich
Who doesn’t need more awesome organizers in their shop?
Andrew Metropolis
I would use this to finally organize my garage!
Josh
It would come in handy since I have a detached garage and I could keep numerous items handy when I cart the packout stack to the house to address the “honey to do list” that never gets shorter. (Plus not supposed to keep my tools in the house after the fact.) Portability is the key.
Jose Galvan
I need these to keep my batteries and tools separated so I can have easy access to either depending on the situation. I already own the packout rolling box large tool box a few parts organizer and a couple of half size organizers also need that new e track system.
Mickey O
I went from DeWalt to Ridgid because of the latches on the original DeWalt. There’s not much available for the Ridgid and doesn’t look like there will be anything new. I have quite a few Milwaukee M12 and M18 and I’m seeing the sets that come in the Packout, plus the radio, plus the vacuum, plus the light… so I’ll be switching to the Milwaukee Packout system and this would be a great start, the 3 drawer would be for my bicycle tools.
mattd
I would use this to sort my screws and other small things like wire nuts etc. 🙂
Dominic L
I have a bin of hand tools. And need a drawer system, to reorganize and eliminate the bin.
Jbongo
I would use it to organize tools and miscellaneous items on my workbench. Right now I have a great work bench space, but not good storage. I have three basic Plano tool boxes that hold things, but I could use an upgrade. ( On a side note, as a DIY person, I’ve found the Plano tool boxes to hold up well and have good space for the price).
Clay
I would use this to get my sons Milwaukee collection started. He’s only in 5th grade but it’s never to soon to start collecting tools.
us4ipq
I’d like to organize all my bits and small hand tools in my garage.
John
I’ve never tried a packout box before but I do construction and it seems like milwaukee’s stuff is a lot sturdier than most.
Charvin B.
I would use the packout drawer for my impact wrenches and socket sets in my garage.
JohnL
I need packout drawers to stack on top of my rolling cart!
Robert
Why? Because I love this tool storage system. Eventually I could put my tools in order in the garage. There is no better system 🙂 I have Packout 1, 2 and 3 and the organizer is brilliant.
Greg B
I’d use this to maintain a consistent organization for some of my often used tools, with each having a place of it’s own rather than mixed into an overflowing packout crate.
Command
i would be using at work, to organize cordless tools that get used in multiple locations so they stay together and have a place to be put away. I have a dozen or so of Milwaukee tools
Mike G
I am horrible and staying organized with he ragtag storage boxes I currently have. I’m the family handyman so I move around a lot and this would be perfect for all my drill accessories.
Ray Y
I would use this to organize and store my machinist tools which I routinely need to shuttle between my home shop and my job. I think the ruggedness would suit being thrown in different vehicles all the time, the tough construction would keep rattling to a minimum. The ability to expand my mobile tool setup is a plus, as I’m always picking up new tools as I’m gaining new skills/new jobs. I would probably keep it on the rack at home, then when it needs to come to work it can go on a kart and get wheeled next to the machine I’m using.
Eric D
My basement is currently a mess of tools during a renovation. I’m in need of a better solution for organizing and storing them!
Iron-iceberg
I’ve been waiting for these since Packout first came out. Yea!
Mike K
I would use this to organize my fasteners, wall anchors, small parts that are currently “organized” by being in a milk crate in their original boxes. Then they could all live in the garage and being wall mounted, utilize some wasted space along the walls.
AlexV
I would organize all the fasteners in my shop.
OldDominionDIYer
I am so excited that Milwaukee finally has produced the drawer sets and the wall mounts (horizontal) These would definitely better organize my workshop! I need a place to store my router bits and accessories, and some of my smaller jigs (hinge cut out jig etc… I really will put these to great use!!
Clay
I would use it to start my boys Milwaukee collection. He’s only in 5th grade but it’s never to soon to start collecting tools. 👍
Drotti
Looking for a System to organize my Bike and Motorcycle tools that is portable and light weight.
TJ
Drawers and the racking kit! Amazing for organizing.
Blaire Lipert
My use for the 3 draw box is a little different than most, we would utilize it as part of a mobile kit for my 7 year old daughter when she goes to dance events. Having a mobile unit like this would allow her to organize her makeup, hair, costume accessories, etc., so she doesn’t have to cram everything into a suitcase and then dump it all out to find what she is looking for, things would be easily accessible.
Ben
I would like it to help organize fasteners and small hand tools. It would go well with my other Packout items.
James S
I would use this to organize hand tools. It is far superior to the bucket/ tub method that I use now.
John Fal
Who couldn’t use the Milwaukee Packout 3-drawer tool and parts box and racking kit! It would be like my dog! I’d take it with me everywhere, use it to work on the car around the house and carry my tools to help friends and family out. Thanks:-)
brooke fabricant
well….for me this looks like the perfect storage unit for most of my m12 tools; easy access and not having to open a lid or remove a unit to get to my tools.
Matthew
I would definitely put the drawer units to use with tool storage more-so than supplies. A huge winner from Milwaukee!
John Robbins
I would LOVE these as I have a few Packout items. I would use them to help my garage organization and allow me to be more efficient when I take my tools on the go for work or with friends!
Adam M.
I’d use this fastener storage/organization in my shop
Kevin
I need to get better organized with hand tools and fasteners.
Ryan
I’d upgrade my homemade cargo van packout cabinet with the racking. And the drawers would go at the bottom of a stack on a packout dolly. They’d hold fasteners.
Joe W.
This would be excellent for organizing my countless small electronics components that currently live in a hodge podge of ziploc baggies, jars, and repurposed containers. Would definitely save me a ton of time and productivity.
Mike Hansson
I would use it to finally get some order in my tool shed. It looks like a good quality tool box to me.
Manny Bacani
I will gift my wife with this drawer to organize her balloons and decor tools. She is launching her Decor business here in Hawaii. I don’t want her to use anything else but Milwaukee. Aloha!!
Analyst
I would use this to organize boxes of Weatherpack connectors, pins, gaskets, and crimp tools as well as a host of other 12V electrical connectors that I have lugged around in the same cardboard box for over a decade… Perfect portable storage solution!!!
Dung Nguyen
Winning the Milwaukee Packout 3-drawer tool and parts box and racking kit would be awesome.
Having drawers in my enclosed trailers would boost my productivity 10x along with my existing e-track/x-track rails.
I’ve been waiting for Packout drawers forever. Can’t wait till they are released.
Good luck everyone.
Geoff
I would use the drawer packout and wall mount to better organize and locate fasteners and small parts for household repair. Right now I have some of that floating around in a couple of non packout Milwaukee organizers, one for electrical and one for fasteners.
Ilan M. Sasson
I would use it for my assortment of electrical termination and wiring supplies, tags and crimpers…
It seems to be a great system to consolidate and compartmentalize tools and supplies for specific tasks.
JoeM
I look forward to adding the new drawer units to my small but growing Packout collection. The drawers look like they will be a great solution for lower in the stack.
andy
I have sooooo much stuff laying around. I am ocd if I don’t get some of these tools organized I’ll probably be put in a asylum. I think you know how I’d use it.
Ruslan C.
I am still using some cheapo walmart organiser for my hand tools, while all my m18 and m12 tools are sitting in a great Milwaukee packout boxes. Would love to finish my Milwaukee storage collection with this one.
Guru prasad
need a good box to house my tool sets and this seems like a awesome one. Thanks for your website, i learnt more about tools than anywhere else.
Mickey C.
I a self-employed carpenter…
During this crisis got jack from higher up …
Food and home bills would be great help but I don’t see that coming…
So these front access boxes would be some sunshine …
Mike
I would use this to finally stop carrying my tools in a mess of toolbags, and start getting properly organized with Milwaukee packout!
Matt P.
Looks good and could use as I am switching over from another system. Would like to get my work trailer setup but it all takes time and Money.
Dan Watson
Are you going to announce who won?
Conor
I have just started switching my tools and boxes over from the lboxx system. I currently only have the pack out base but love it’s rigidity and slightly larger size so far!
Mickey
I had that lboxx system, did not like it at all.
Doug N
Did you announce the winners?
Stuart
Not yet – I have 2 giveaways I’m still processing for.
People not following the entry rules makes it a little harder to ensure things are fair. I expect to have everything sorted out and winners selected this week.
Ramon O Vizcarra
Will the announcement be posted here?
Dan Watson
I doubt he will announce that he decided to keep them..
Todd F
Did you announce the winners?
Stuart
Not yet, but the winners have all been contacted. A consolidated winners announcement page is planned.
Mickey O
Yes, Todd E won, you were one letter away from winning.