Breaker bars are great for heavy duty wrenching, and are typically built to handle serious abuse. They are typically very simply designed and feature a 180° pivoting drive head at the end of a handle.
Proto ratchet adapters, which are available in 3/8″ (J5247), 1/2″ (J5447), and 3/4″ (J5647) sizes, are designed to fit onto the end of breaker bars to improve their versatility and also make it easier to access fasteners.
Advertisement
One side has a female square drive recess, the other has a male square drive end.
These ratchet adapters can also be attached to other accessories, such as T-handles, and other square drive accessories that might not have built-in ratcheting functionality.
Essentially, they turn non-ratcheting breaker bars and drive tools into ratcheting ones.
Buy Now: 3/8″ adapter, 1/2″ adapter, 3/4″ adapter, via Amazon
Amazon’s pricing on some sizes are great, but the 3/8″ adapter is currently grossly overpriced there. If that’s the size you want (which is the one I bought last month and am currently testing out), you can also find it at Zoro . Zoro and Amazon have matching prices for 1/2″ and 3/4″ adapters (at the time of this posting).
mike
These are great,althou they are a bit bulky they are so handy for many things.
fred
The counterparts from Williams (part No’s B-55 (3/8) and S-55 (1/2) ) are sadly no longer available. The 3/8 inch size was more useful on the end of a speeder than on a breaker bar – but the 1/2 inch size could work with a breaker bar, T-Handle, Spinner, Speeder etc. With a T-Handle and the appropriate deep socket it can be uses to thread rod ends with a ratcheting motion.
fred
When I talked about threading rod – naturally you also need a hex die to fit into the socket.
Allen
We had these at the school I retired from. They also work great as a ratchet all to themselves, sort of a thumb wheel ratchet.
Chad klump
I just got these in 3/8 and 1/2. While I have not had a chance to put them to use. They feel much smoother than a snap on. They have 25 teeth and it is a single pawl but two teeth on the pawl with a offset tooth so it is like a 50 tooth design I believe. I have only opened the 3/8 and that is how I assumed they worked. They are very nice I highly recommend but I have not had a chance to put a breaker bar on them and get down to business.
cody
That price is ridiculous I can buy a 1/2 ratcheting breaker bar on Amazon for under 40 dollars. Bostitch, neiko and many other brands under that price.
SteveR
I’ve never tried one to determine their usefulness. My recollection, though, is that they are over-sized and bulky, so you need a fair amount of room to use one.
The other restriction was the number of teeth on the ratcheting mechanism, often as low as 20, leaving 18 degrees between clicks. That’s okay for one-time jobs, but if you have a lot of repetitive work or are ratcheting in restricted areas, they can slow you down. You’ll likely need an extension, too, in restricted spaces, owing to their size.
chad
I am 99 % sure that they are 50 teeth so that is a 7.2 degree swing arc.
SteveR
Chad–Good to know about the number of teeth. I had looked in the Snap-on catalogue while writing my comments, so that is not representative of other manufacturers. Thanks.
Chad klump
Yeah, I have a snap on at work right now in my desk. I am not a fan of them they are clunky. The protos are a lot smoother. Like is mentioned in my earlier post. It has 25 teeth but on the pawl it has 2 teeth and one is off set. I can not remeber exatly I could be plus or minus a tooth. My protos are at home and I have snap on at work. The proto is a lot easier to change direction and is a lot smoother. Snap on could have done a lot better.
fred
The Snap-On variant looks just like the 40 year old Williams ones that I have – and changing direction is a sore point.
Ken
I have a similar New Britain NS-12 which I bought new in the early 1980s. It seemed like a great idea at the time, but has lain virtually unused in my tool-chest since then. Here’s a beat-up one on eBay for $18.95:
http://www.ebay.com/itm/Vintage-New-Britain-Model-NS-12-1-2-inch-Drive-Ratchet-Socket-Adapter-/221532670314?pt=LH_DefaultDomain_0&hash=item339460496a
Jacob B
To each his own: I recently bought an NS-12 in much better condition for a similar price on eBay and really enjoy it. It works well with a short-handle flex head breaker bar with female broaching in the end so you can stick a T-handle on it.